Charging Port Flex Cable
Apple iPad 10.2 (2019) Charging Port Flex Cable Replacement
- Fits
- Apple iPad 10.2 (2019)
- Fixes
- Charging faults
- Quality
- Brand new, OEM quality
- Fitting
- Professional install
Overview
What this part is
The 2019 iPad 10.2-inch charges through a Lightning port on a flex cable at the bottom of the tablet. Constant use while charging wears the port, and dirt packed into it stops the cable seating fully.
This flex has the Lightning port already fitted. Reaching it means taking the screen off, which is the most delicate part of the job. If the iPad shows "Accessory not supported" with several good cables, or charges only at an angle, the port flex is the usual cause.
Compatibility
Specifications and compatibility
- Part
- Charging Port Flex Cable
- Compatible with
- Apple iPad 10.2 (2019)
- Model numbers
- A2197 · A2198 · A2200
- Does not fit
- iPad 9.7-inch, iPad (10th generation), iPad Air, iPad Pro or any other model
- Fixes
- Loose, slow or failed charging and lost USB data connection
- Does not fix
- Battery, screen or main board faults
- Quality
- Brand new, OEM-quality Lightning charging port flex cable. Tested before dispatch.
- Brand
- Unbranded, compatible with Apple iPad 10.2 (2019)
- In the box
- 1 × charging port flex cable for iPad 10.2-inch (2019).
- Colour
- As shown in the photos
- Installation
- Professional installation recommended
- Supplied by
- Supreme Phone Parts Ltd, Manchester, UK
Before you order
Is this the right part?
Signs it needs replacing
- The cable only charges at an angle
- "Accessory not supported" appears with good cables
- The iPad is not seen by a computer
- Charging keeps starting and stopping
How to check your model
Open Settings › General › About. The model name should read iPad (7th generation). Tap the model number to see the A-number (for example A2197).
The 2019 iPad has a 10.2-inch screen, a home button and a Lightning port. The 10th generation iPad has USB-C and no home button.
Professional installation
How a technician fits this part
- Power the iPad off and warm the screen edges to soften the adhesive.
- Lift the screen slowly with thin opening picks, avoiding the display cables, and disconnect the battery first.
- Remove the screws and brackets over the charging flex and ease the old flex away from its adhesive.
- Fit the new flex in the same position and seat its connector firmly.
- Reconnect the battery and screen and test the repair before sealing.
- Apply new adhesive, close the iPad and press evenly while it cures.
- Test charging, USB data and the speakers.
Check that the part matches the device before fitting it or removing any adhesive backing. Once a part has been fitted, it cannot be returned for a change of mind. Faulty parts are always covered.
FAQ
Frequently asked questions
Will this fit my iPad 10.2 (2019)?
Yes, if Settings › General › About shows iPad (7th generation), models A2197, A2198 or A2200.
Does it fit the iPad 9.7-inch?
No. The iPad 9.7-inch (2017 and 2018) uses a different charging flex.
Will this fix "Accessory not supported"?
Often, yes, if the fault is a damaged or worn port. Clean the port and try a known good Apple cable first.
Is it made by Apple?
No. It is a brand new, OEM-quality charging port flex cable made to fit the iPad 10.2-inch (2019), and every part is tested before dispatch.
Should I fit it myself?
We recommend professional installation. The iPad 10.2-inch screen is glued in place and cracks easily during opening, so heat, thin opening picks and new adhesive are needed.
How quickly will it arrive?
Orders placed before 4pm on a working day are dispatched the same day from Manchester by Royal Mail Tracked. Delivery is free on UK orders over £5. You can also collect from our shop at 33 Moulton Street, Manchester M8 8FQ.
Prepared by the Supreme Phone Parts team, Manchester. Last updated September 2026.