Charging Port Flex Cable
Apple iPad Pro 10.5 (WiFi) Charging Port Flex Cable Replacement
- Fits
- Apple iPad Pro 10.5 (WiFi)
- Fixes
- Charging faults
- Quality
- Brand new, OEM quality
- Fitting
- Professional install
Overview
What this part is
The iPad Pro 10.5-inch charges through a Lightning port on a flex cable at the bottom edge. A worn port, bent contacts or liquid damage can stop the tablet charging or connecting to a computer.
This flex is made for the WiFi-only version. Choose the colour that matches your iPad: the port surround shows through the housing, so grey suits a Space Grey iPad and white suits the lighter colours. Check the photos before ordering.
Compatibility
Specifications and compatibility
- Part
- Charging Port Flex Cable
- Compatible with
- Apple iPad Pro 10.5 (WiFi)
- Model numbers
- A1701 (WiFi)
- Does not fit
- iPad Pro 10.5 WiFi + Cellular (A1709), iPad Air (2019), iPad Pro 11 or any other model
- Fixes
- Loose, slow or failed charging and lost USB data connection
- Does not fix
- Battery, screen or main board faults
- Quality
- Brand new, OEM-quality Lightning charging port flex cable. Tested before dispatch.
- Brand
- Unbranded, compatible with Apple iPad Pro 10.5 (WiFi)
- In the box
- 1 × charging port flex cable for iPad Pro 10.5 (WiFi), in your chosen colour.
- Colour
- Grey or White
- Installation
- Professional installation recommended
- Supplied by
- Supreme Phone Parts Ltd, Manchester, UK
Before you order
Is this the right part?
Signs it needs replacing
- The cable only charges at an angle
- "Accessory not supported" appears with good cables
- The iPad is not seen by a computer
- Charging keeps stopping
How to check your model
Open Settings › General › About. The model name should read iPad Pro (10.5-inch). Tap the model number to see the A-number (for example A1701).
A1701 is the WiFi-only model. If your iPad has a SIM tray, it is the WiFi + Cellular model and this flex is not the right part.
Professional installation
How a technician fits this part
- Power the iPad Pro 10.5 off and warm the screen edges to soften the adhesive.
- Lift the screen slowly with thin opening picks, avoiding the display cables, and disconnect the battery first.
- Remove the screws and brackets over the charging flex and ease the old flex away from its adhesive.
- Fit the new flex in the same position and seat its connector firmly.
- Reconnect the battery and screen and test the repair before sealing.
- Apply new adhesive, close the iPad and press evenly while it cures.
- Test charging, USB data and all four speakers.
Check that the part matches the device before fitting it or removing any adhesive backing. Once a part has been fitted, it cannot be returned for a change of mind. Faulty parts are always covered.
FAQ
Frequently asked questions
Will this fit my iPad Pro 10.5?
Yes, if it is the WiFi-only model A1701. Check Settings › General › About.
Does it fit the WiFi + Cellular iPad Pro 10.5?
No. This flex is listed for the WiFi version only. The cellular model (A1709) needs a different flex.
Which colour should I choose?
Choose grey for a Space Grey iPad and white for Silver, Gold or Rose Gold. Compare the photos with your iPad if unsure.
Is it made by Apple?
No. It is a brand new, OEM-quality charging port flex cable made to fit the iPad Pro 10.5-inch (WiFi), and every part is tested before dispatch.
Should I fit it myself?
We recommend professional installation. The iPad Pro 10.5 screen is glued in place and cracks easily during opening, so heat, thin opening picks and new adhesive are needed.
How quickly will it arrive?
Orders placed before 4pm on a working day are dispatched the same day from Manchester by Royal Mail Tracked. Delivery is free on UK orders from £5.
Prepared by the Supreme Phone Parts team, Manchester. Last updated September 2026.