Power Button, Flash & Microphone Flex
Apple iPhone 11 Pro Power Button, Flash & Microphone Flex Replacement
- Fits
- Apple iPhone 11 Pro
- Fixes
- Side button, flash and mic faults
- Quality
- Brand new, OEM quality
- Fitting
- Professional install
Overview
What this part is
On the iPhone 11 Pro one flex cable carries the side (power) button switch, the rear camera flash and a microphone. Damage to this flex can stop the side button working, leave the torch dead, or make video recordings sound muffled.
This flex replaces all three. It is fitted deep inside the phone, so the screen and some internal parts must be removed to reach it.
Compatibility
Specifications and compatibility
- Part
- Power Button, Flash & Microphone Flex
- Compatible with
- Apple iPhone 11 Pro
- Model numbers
- A2160 · A2215 · A2217
- Does not fit
- iPhone 11, iPhone 11 Pro Max, iPhone XS or any other model
- Fixes
- An unresponsive side button, a dead flash or torch, and a faulty microphone on this flex
- Does not fix
- Volume button, earpiece, screen or main board faults
- Quality
- Brand new, OEM-quality power button, flash and microphone flex cable. Tested before dispatch.
- Brand
- Unbranded, compatible with Apple iPhone 11 Pro
- In the box
- 1 × power button, flash and microphone flex cable for iPhone 11 Pro.
- Colour
- As shown in the photos
- Installation
- Professional installation recommended
- Supplied by
- Supreme Phone Parts Ltd, Manchester, UK
Before you order
Is this the right part?
Signs it needs replacing
- The side button does not respond
- The torch and flash do not light
- Video recordings sound muffled or silent
- The fault started after a drop or liquid damage
How to check your model
Open Settings › General › About. The model name should read iPhone 11 Pro. Tap the model number to see the A-number (for example A2215).
The iPhone 11 Pro has a 5.8-inch screen. The 11 Pro Max is larger and uses a different flex.
Professional installation
How a technician fits this part
- Power the Apple iPhone 11 Pro off, remove the two pentalobe screws next to the charging port and warm the screen edges to soften the adhesive.
- Open the display carefully and disconnect the battery before anything else.
- Remove the parts covering the power button flex, including the rear camera, and unclip the old flex.
- Fit the new flex, line up the switch with the side button and refit the brackets and screws.
- Reconnect the display and battery, then test the repair before sealing.
- Apply new adhesive, close the phone and press evenly while it cures.
- Test the side button, torch, flash and a video recording.
Check that the part matches the device before fitting it or removing any adhesive backing. Once a part has been fitted, it cannot be returned for a change of mind. Faulty parts are always covered.
FAQ
Frequently asked questions
Will this fit my iPhone 11 Pro?
Yes, if Settings › General › About shows iPhone 11 Pro. It fits models A2160, A2215 and A2217.
Does it fit the iPhone 11 Pro Max?
No. The iPhone 11 Pro Max uses its own power button flex. Choose the 11 Pro Max listing.
Will it fix muffled video sound?
It can. One of the microphones is on this flex, so a damaged flex can affect video sound. Clean the microphone holes first.
Is it made by Apple?
No. It is a brand new, OEM-quality power button, flash and microphone flex made to fit the iPhone 11 Pro, and every part is tested before dispatch.
Should I fit it myself?
We recommend professional installation. Opening an iPhone 11 Pro needs heat, pentalobe and tri-point screwdrivers and new adhesive, and the battery must be disconnected safely.
How quickly will it arrive?
Orders placed before 4pm on a working day are dispatched the same day from Manchester by Royal Mail Tracked. Delivery is free on UK orders over £5. You can also collect from our shop at 33 Moulton Street, Manchester M8 8FQ.
Prepared by the Supreme Phone Parts team, Manchester. Last updated September 2026.