Power and Volume Flex Cable with NFC Coil
Apple iPhone 13 Pro Max Power and Volume Flex Cable with NFC Coil Replacement
- Fits
- Apple iPhone 13 Pro Max
- Fixes
- Dead side button
- Quality
- Brand new, OEM quality
- Fitting
- Professional install
Overview
What this part is
On the iPhone 13 Pro Max, the side (power) button, the volume buttons and the NFC antenna coil used for Apple Pay share one flex cable. A drop, liquid damage or a torn flex during another repair can leave the buttons dead or unreliable.
This part replaces the complete flex, including the NFC coil. If the buttons feel stuck or loose, the fault may be the metal button caps in the frame rather than the flex.
Compatibility
Specifications and compatibility
- Part
- Power and Volume Flex Cable with NFC Coil
- Compatible with
- Apple iPhone 13 Pro Max
- Model numbers
- A2643 · A2484 · A2641 · A2644 · A2645
- Does not fit
- iPhone 13 Pro, iPhone 14 Pro Max, iPhone 12 Pro Max or any other model
- Fixes
- A side button or volume buttons that do not respond, or NFC problems caused by a damaged flex
- Does not fix
- Stuck or broken button caps, software faults or main board faults
- Quality
- Brand new, OEM-quality power and volume flex cable with nfc coil. Tested before dispatch.
- Brand
- Unbranded, compatible with Apple iPhone 13 Pro Max
- In the box
- 1 × power and volume flex cable with nfc coil for iPhone 13 Pro Max.
- Colour
- As shown in the photos
- Installation
- Professional installation recommended
- Supplied by
- Supreme Phone Parts Ltd, Manchester, UK
Before you order
Is this the right part?
Signs it needs replacing
- The side button does nothing when pressed
- The volume buttons do not change the volume
- The buttons only work some of the time
- Apple Pay stopped working after a drop or repair
How to check your model
Open Settings › General › About. The model name should read iPhone 13 Pro Max. Tap the model number to see the A-number (for example A2643).
The iPhone 13 Pro Max has a 6.7-inch screen and three rear cameras. The iPhone 13 Pro is smaller, with a 6.1-inch screen.
Professional installation
How a technician fits this part
- Power the iPhone 13 Pro Max off, remove the two pentalobe screws beside the charging port and warm the edges to soften the adhesive.
- Open the phone carefully and disconnect the battery before anything else.
- Remove the parts covering the button flex and peel the old flex carefully away from the frame.
- Fit the new flex, line up each switch with its button and seat the connector firmly.
- Reconnect the battery, then test the repair before sealing.
- Apply new adhesive, close the phone and press evenly while it cures.
- Test the side button, both volume buttons and Apple Pay.
Check that the part matches the device before fitting it or removing any adhesive backing. Once a part has been fitted, it cannot be returned for a change of mind. Faulty parts are always covered.
FAQ
Frequently asked questions
Will this fit my iPhone 13 Pro Max?
Yes, if Settings › General › About shows iPhone 13 Pro Max. It fits models A2643, A2484, A2641, A2644 and A2645. It does not fit the iPhone 13 Pro or iPhone 14 Pro Max.
Does it fit the iPhone 13 Pro?
No. The iPhone 13 Pro uses a different part. This one is made only for the iPhone 13 Pro Max.
Does this include the NFC coil?
Yes. The supplier lists it as the NFC coil with power and volume flex cable for the iPhone 13 Pro Max, so it comes as one part.
Is it made by Apple?
No. It is a brand new, OEM-quality power and volume flex cable with nfc coil made to fit the iPhone 13 Pro Max, and it is tested before dispatch.
Should I fit it myself?
We recommend professional installation. Opening an iPhone needs heat, pentalobe and tri-point screwdrivers and new adhesive, and the battery must be disconnected safely.
How quickly will it arrive?
Orders placed before 4pm on a working day are dispatched the same day from Manchester by Royal Mail Tracked. Delivery is free on UK orders over £5. You can also collect from our shop at 33 Moulton Street, Manchester M8 8FQ.
Prepared by the Supreme Phone Parts team, Manchester. Last updated September 2026.