Rear Camera
Apple iPhone 13 Rear Camera Replacement
- Fits
- Apple iPhone 13
- Fixes
- Faulty rear camera
- Quality
- Brand new, OEM quality
- Fitting
- Professional install
Overview
What this part is
The iPhone 13 has two rear cameras set diagonally. If a drop or liquid damages the camera module, the camera app may show a black screen, the picture may shake or buzz, or it may refuse to focus.
This part replaces the rear camera module. It does not replace the glass lens cover on the back of the phone, so if the lens glass is cracked, replace that as well. After fitting, iOS may show a notice in Settings › General › About that the camera cannot be verified. This is normal with a non-Apple part.
Compatibility
Specifications and compatibility
- Part
- Rear Camera
- Compatible with
- Apple iPhone 13
- Model numbers
- A2482 · A2631 · A2633 · A2634 · A2635
- Does not fit
- iPhone 12, iPhone 13 Pro or any other model
- Fixes
- A black rear camera, shaking or buzzing picture, and failed focus
- Does not fix
- A cracked rear camera lens glass, the flash, or main board faults
- Quality
- Brand new, OEM-quality rear camera. Tested before dispatch.
- Brand
- Unbranded, compatible with Apple iPhone 13
- In the box
- 1 × rear camera module for iPhone 13.
- Colour
- As shown in the photos
- Installation
- Professional installation recommended
- Supplied by
- Supreme Phone Parts Ltd, Manchester, UK
Before you order
Is this the right part?
Signs it needs replacing
- The camera app shows a black screen
- The picture shakes, vibrates or buzzes
- Photos will not focus
- Switching between lenses fails or freezes
How to check your model
Open Settings › General › About. The model name should read iPhone 13. Tap the model number to see the A-number (for example A2482).
The iPhone 13 has a 6.1-inch screen and two rear cameras set diagonally. The iPhone 12 has its two cameras in a vertical line, and the iPhone 13 Pro has three.
Professional installation
How a technician fits this part
- Power the iPhone 13 off, remove the two pentalobe screws next to the charging port and warm the screen edges to soften the adhesive.
- Open the display carefully and disconnect the battery before anything else.
- Remove the bracket over the rear camera and disconnect it.
- Lift out the old camera and fit the new one without touching the lenses.
- Reconnect the display and battery, then test the repair before sealing.
- Apply new adhesive, close the phone and press evenly while it cures.
- Test every lens, focus, video and the flash.
Check that the part matches the device before fitting it or removing any adhesive backing. Once a part has been fitted, it cannot be returned for a change of mind. Faulty parts are always covered.
FAQ
Frequently asked questions
Will this fit my iPhone 13?
Yes, if Settings › General › About shows iPhone 13. It fits models A2482, A2631, A2633, A2634 and A2635. It does not fit the iPhone 12 or iPhone 13 Pro.
Does it fit the iPhone 12?
No. The iPhone 12 uses a different rear camera. This part is made only for the iPhone 13.
Will this fix a cracked camera lens?
No. This is the camera module inside the phone. The glass lens cover on the back of the iPhone 13 is a separate part.
Is it made by Apple?
No. It is a brand new, OEM-quality rear camera made to fit the iPhone 13, and every part is tested before dispatch.
Should I fit it myself?
We recommend professional installation. Opening a iPhone 13 needs heat, pentalobe and tri-point screwdrivers and new adhesive, and the battery must be disconnected safely.
How quickly will it arrive?
Orders placed before 4pm on a working day are dispatched the same day from Manchester by Royal Mail Tracked. Delivery is free on UK orders over £5. You can also collect from our shop at 33 Moulton Street, Manchester M8 8FQ.
Prepared by the Supreme Phone Parts team, Manchester. Last updated September 2026.