SIM Card Tray
Apple iPhone 17 SIM Card Tray Replacement
- Fits
- Apple iPhone 17
- Fixes
- Lost or bent tray
- Quality
- Brand new, OEM quality
- Fitting
- Professional install
Overview
What this part is
The SIM card tray holds your nano-SIM in the side of the iPhone 17. Trays are easy to lose, bend or scratch, and a bent tray may not sit flush or may not hold the SIM firmly against the contacts.
This is a replacement nano-SIM tray. UK models of the iPhone 17 take a nano-SIM in this tray as well as eSIM. US models are eSIM-only and have no tray. It pushes into the slot by hand, and you use a SIM eject pin to remove it again. No heat or tools are needed to open the phone.
Compatibility
Specifications and compatibility
- Part
- SIM Card Tray
- Compatible with
- Apple iPhone 17
- Model numbers
- Check Settings › General › About
- Does not fit
- iPhone 17 Pro, iPhone 16, iPhone Air or any other model
- Fixes
- A lost, bent, scratched or wrong-colour SIM tray
- Does not fix
- A faulty SIM reader, No SIM errors caused by the main board, or network problems
- Quality
- Brand new, OEM-quality nano-SIM card tray. Tested before dispatch.
- Brand
- Unbranded, compatible with Apple iPhone 17
- In the box
- 1 × SIM card tray for iPhone 17 in your chosen colour.
- Colour
- Choose from: Black, Green, Blue, Purple, White
- Installation
- Professional installation recommended
- Supplied by
- Supreme Phone Parts Ltd, Manchester, UK
Before you order
Is this the right part?
Signs it needs replacing
- The SIM tray has been lost
- The tray is bent and will not slide in flush
- The tray is scratched or the wrong colour
- The SIM moves about and shows No SIM now and then
How to check your model
Open Settings › General › About. The model name should read iPhone 17. Tap the model number to see the A-number and compare it with the box.
The iPhone 17 has a 6.3-inch screen and two rear cameras. The iPhone 17 Pro has three rear cameras in a wide camera plateau.
Professional installation
How a technician fits this part
- Power the iPhone 17 off.
- Push a SIM eject pin into the small hole beside the tray to release the old tray, if one is fitted.
- Place your nano-SIM in the new tray, gold contacts facing down, matching the cut corner.
- Slide the tray straight into the slot until it sits flush with the frame.
- Power the phone on and check the network signal appears.
Check that the part matches the device before fitting it or removing any adhesive backing. Once a part has been fitted, it cannot be returned for a change of mind. Faulty parts are always covered.
FAQ
Frequently asked questions
Will this fit my iPhone 17?
Yes, if Settings › General › About shows iPhone 17. It does not fit the iPhone 17 Pro or iPhone 16.
Does it fit the iPhone 17 Pro?
No. The iPhone 17 Pro uses a different sim card tray. This part is listed only for the iPhone 17.
Will this fix a No SIM message?
Only if the old tray was bent or missing and the SIM was not sitting properly. If a No SIM message stays with a good tray and SIM, the SIM reader or main board is the likely fault.
Is it made by Apple?
No. It is a brand new, OEM-quality sim card tray made to fit the iPhone 17, and every part is tested before dispatch.
Should I fit it myself?
Yes, this is one of the few parts you can fit at home. You only need a SIM eject pin. Make sure the SIM sits flat in the tray before sliding it in.
How quickly will it arrive?
Orders placed before 4pm on a working day are dispatched the same day from Manchester by Royal Mail Tracked. Delivery is free on UK orders from £5.
Prepared by the Supreme Phone Parts team, Manchester. Last updated September 2026.