SIM Card Tray
Google Pixel 4 SIM Card Tray Replacement
- Fits
- Google Pixel 4
- Fixes
- Lost or bent tray
- Quality
- Brand new, OEM quality
- Fitting
- Professional install
Overview
What this part is
The SIM card tray on the Google Pixel 4 slides into the side of the frame and holds your nano-SIM card in place against the contacts. A tray that is lost, bent or cracked can stop the phone reading the SIM, or leave a gap that lets dust into the slot.
This is a plain replacement tray. It is fitted from the outside with a SIM eject pin, so the phone does not need to be opened. If the phone still shows no SIM with a new tray and a known good SIM card, the SIM reader inside the phone may be at fault.
Compatibility
Specifications and compatibility
- Part
- SIM Card Tray
- Compatible with
- Google Pixel 4
- Model numbers
- G020I · G020M · G020N (Pixel 4) · Pixel 4 XL
- Does not fit
- Any model other than the Pixel 4 and Pixel 4 XL
- Fixes
- A lost, bent, cracked or loose SIM card tray
- Does not fix
- SIM reader, signal, network or main board faults
- Quality
- Brand new, OEM-quality nano-SIM card tray. Tested for fit before dispatch.
- Brand
- Unbranded, compatible with Google Pixel 4
- In the box
- 1 × SIM card tray for Google Pixel 4.
- Colour
- Black
- Installation
- Professional installation recommended
- Supplied by
- Supreme Phone Parts Ltd, Manchester, UK
Before you order
Is this the right part?
Signs it needs replacing
- The SIM tray is lost or missing
- The tray is bent or cracked and will not slide in
- The tray sticks out and does not sit flush with the frame
- The phone shows no SIM because the card moves in the tray
How to check your model
Open Settings › About phone. The device name should read Pixel 4, not Pixel 4 XL. The model code (G020I or G020M or G020N) is shown in Settings › About phone › Regulatory labels.
The Pixel 4 has a 5.7-inch screen. The Pixel 4 XL is larger, at 6.3 inches. The Pixel 4a is a different phone with a single rear camera.
Professional installation
How a technician fits this part
- Power the phone off.
- Insert a SIM eject pin into the small hole next to the tray and press gently.
- Pull out the old tray, or check the slot is empty and clean.
- Place the nano-SIM card in the new tray, gold contacts facing down.
- Slide the tray fully into the slot until it sits flush.
- Power on and check the phone reads the SIM.
Check that the part matches the device before fitting it or removing any adhesive backing. Once a part has been fitted, it cannot be returned for a change of mind. Faulty parts are always covered.
FAQ
Frequently asked questions
Will this fit my Pixel 4?
Yes, if Settings › About phone shows Pixel 4. It also fits the Pixel 4 XL. Model codes: G020I, G020M, G020N.
Does it fit the Pixel 4 XL?
Yes. This part is listed for both the Pixel 4 and the Pixel 4 XL. It does not fit other Pixel models.
Does it hold two SIM cards?
No. It holds one nano-SIM card. The Pixel 4 also supports eSIM, which does not use the tray.
Is it made by Google?
No. It is a brand new, OEM-quality sim card tray made to fit the Google Pixel 4, and every part is tested before dispatch.
Should I fit it myself?
You can fit this yourself. It only needs a SIM eject pin and the phone does not need to be opened. If the phone still does not read the SIM, a repair shop can check the SIM reader.
How quickly will it arrive?
Orders placed before 4pm on a working day are dispatched the same day from Manchester by Royal Mail Tracked. Delivery is free on UK orders over £5. You can also collect from our shop at 33 Moulton Street, Manchester M8 8FQ.
Prepared by the Supreme Phone Parts team, Manchester. Last updated September 2026.