Fingerprint Sensor Flex Cable
Google Pixel 7 Pro Fingerprint Sensor Flex Cable Replacement
- Fits
- Google Pixel 7 Pro
- Fixes
- Fingerprint faults
- Quality
- Brand new, OEM quality
- Fitting
- Professional install
Overview
What this part is
The Google Pixel 7 Pro uses an optical fingerprint sensor that sits under the screen and reads through the display. The sensor is mounted on a small flex cable inside the phone. Liquid damage, a drop or a careless screen repair can damage it, and the phone then reports a fingerprint hardware problem or stops reading fingers.
This is a replacement fingerprint sensor flex cable for the Pixel 7 Pro. It works with a working OLED display; an unsuitable replacement screen can stop any sensor from reading. Face Unlock (where fitted) and your PIN are not affected by this part.
Compatibility
Specifications and compatibility
- Part
- Fingerprint Sensor Flex Cable
- Compatible with
- Google Pixel 7 Pro
- Model numbers
- GP4BC · GE2AE · GFE4J
- Does not fit
- Pixel 7, Pixel 6 Pro or any other model
- Fixes
- An in-display fingerprint sensor that is not detected, fails to enrol or stops reading
- Does not fix
- Screen, touch, charging or main board faults
- Quality
- Brand new, OEM-quality fingerprint sensor flex cable. Tested before dispatch.
- Brand
- Unbranded, compatible with Google Pixel 7 Pro
- In the box
- 1 × fingerprint sensor flex cable for Google Pixel 7 Pro.
- Colour
- As shown in the photos
- Installation
- Professional installation recommended
- Supplied by
- Supreme Phone Parts Ltd, Manchester, UK
Before you order
Is this the right part?
Signs it needs replacing
- The phone shows a fingerprint hardware error
- Fingerprint setup fails or will not start
- The sensor stopped reading after a drop or screen repair
- The fingerprint option has disappeared from Settings
How to check your model
Open Settings › About phone. The device name should read Pixel 7 Pro, not Pixel 7 or Pixel 6 Pro. The model code (GP4BC, GE2AE, GFE4J) is shown in Settings › About phone › Regulatory labels and on the box.
The Pixel 7 Pro has a 6.7-inch curved screen and three rear cameras in a metal camera bar. The Pixel 7 has a smaller flat screen and two rear cameras.
Professional installation
How a technician fits this part
- Power the Pixel 7 Pro off and remove the SIM tray.
- Warm the screen edges and open the display carefully, keeping the display cable safe.
- Disconnect the battery before anything else.
- Unplug and remove the old fingerprint sensor, taking care not to touch the sensor window.
- Fit the new sensor in the same position and reconnect its flex.
- Reseal the phone, then enrol your fingerprints again and test the sensor.
Check that the part matches the device before fitting it or removing any adhesive backing. Once a part has been fitted, it cannot be returned for a change of mind. Faulty parts are always covered.
FAQ
Frequently asked questions
Will this fit my Pixel 7 Pro?
Yes, if Settings › About phone shows Pixel 7 Pro. It fits models GP4BC, GE2AE, GFE4J. It does not fit the Pixel 7 or Pixel 6 Pro.
Does it fit the Pixel 7?
No. The Pixel 7 is a different phone with a different part. This fingerprint sensor flex cable is made for the Pixel 7 Pro only.
Will I need to set up my fingerprints again?
Yes. After a new sensor is fitted you need to add your fingerprints again in Settings › Security. On the Pixel 7 Pro the sensor may also need calibrating with Google's Pixel repair tools before it reads reliably.
Is it made by Google?
No. It is a brand new, OEM-quality fingerprint sensor flex cable made to fit the Google Pixel 7 Pro, and every part is tested before dispatch.
Should I fit it myself?
We recommend professional installation. Opening the Pixel 7 Pro needs heat, thin picks and new screen adhesive, and the battery must be disconnected safely before any part is changed.
How quickly will it arrive?
Orders placed before 4pm on a working day are dispatched the same day from Manchester by Royal Mail Tracked. Delivery is free on UK orders over £5. You can also collect from our shop at 33 Moulton Street, Manchester M8 8FQ.
Prepared by the Supreme Phone Parts team, Manchester. Last updated September 2026.