Charging Port Board
Huawei MatePad SE 2023 Charging Port Board Replacement
- Fits
- Huawei MatePad SE 2023
- Fixes
- Charging faults
- Quality
- Brand new, OEM quality
- Fitting
- Professional install
Overview
What this part is
The Huawei MatePad SE 2023 charges through a USB-C port at the bottom of the tablet. Daily plugging in, pocket lint and drops wear the port, and the charger may only work at an angle or stop working altogether.
This is the charging port board as sold by our supplier as a welding-type board. Depending on the unit, fitting may need the connection soldered, so professional installation is strongly recommended. If the tablet still does not charge with a new part and a known good cable, the battery, charger or main board may be at fault.
Compatibility
Specifications and compatibility
- Part
- Charging Port Board
- Compatible with
- Huawei MatePad SE 2023
- Model numbers
- AGS6-W00
- Does not fit
- MatePad SE 2022 (AGS5), MatePad T10s or any other model
- Fixes
- Loose, slow or intermittent charging and lost USB data connection
- Does not fix
- Battery, screen or main board faults
- Quality
- Brand new, OEM-quality charging port board. Tested before dispatch.
- Brand
- Unbranded, compatible with Huawei MatePad SE 2023
- In the box
- 1 × charging port board for Huawei MatePad SE 2023.
- Colour
- As shown in the photos
- Installation
- Professional installation recommended
- Supplied by
- Supreme Phone Parts Ltd, Manchester, UK
Before you order
Is this the right part?
Signs it needs replacing
- The charger only works at a certain angle, or not at all
- The cable feels loose or falls out of the port
- Charging keeps starting and stopping
- The tablet is not seen by a computer over USB
- Cleaning the port has not helped
How to check your model
Open Settings › About tablet. The device name should read MatePad SE. The model number should be AGS6-W00.
Several MatePad SE and T tablets look alike. The model number on the About tablet screen is the safest check.
Professional installation
How a technician fits this part
- Power the Huawei MatePad SE 2023 off and remove the SIM or card tray.
- Warm the screen edges and lift the display carefully with a thin opening tool and suction cup.
- Remove any screws and covers over the battery connector, then disconnect the battery before touching any other part.
- Unplug the flex cable and remove the old charging port part.
- Fit the new part, reconnect the flex cable firmly and refit the screws and covers.
- Reconnect the battery, test charging with a known good cable, then reseal with new adhesive.
Check that the part matches the device before fitting it or removing any adhesive backing. Once a part has been fitted, it cannot be returned for a change of mind. Faulty parts are always covered.
FAQ
Frequently asked questions
Will this fit my Huawei MatePad SE 2023?
Yes, if your device shows Huawei MatePad SE 2023. It is made for model AGS6-W00. It does not fit the MatePad SE 2022 (AGS5), MatePad T10s.
Does it fit the earlier MatePad SE (AGS5)?
No. This board is listed for the MatePad SE 2023 with model number AGS6-W00 only. Check your model number before ordering.
Do I need to solder anything?
It may be needed. This is a welding-type board, so depending on the unit the connection may have to be soldered. We strongly recommend a repair shop fits it.
Is it made by Huawei?
No. It is a brand new, OEM-quality charging port board made to fit the Huawei MatePad SE 2023, and every part is tested before dispatch.
Should I fit it myself?
We recommend professional installation. The Huawei MatePad SE 2023 has to be opened with heat and plastic tools, and the battery must be disconnected before the new part is connected.
How quickly will it arrive?
Orders placed before 4pm on a working day are dispatched the same day from Manchester by Royal Mail Tracked. Delivery is free on UK orders over £5. You can also collect from our shop at 33 Moulton Street, Manchester M8 8FQ.
Prepared by the Supreme Phone Parts team, Manchester. Last updated September 2026.