In-Cell LCD Screen
Samsung Galaxy A7 (2018) In-Cell LCD Screen Replacement
- Fits
- Samsung Galaxy A7 (2018)
- Fixes
- Broken display
- Quality
- Brand new, OEM quality
- Fitting
- Professional install
Overview
What this part is
The Galaxy A7 (2018) screen is one bonded unit: glass, touch layer and display panel together. If the glass is cracked or touch stops working, the whole assembly is replaced. This part comes as one bonded assembly, so no glass or touch layer needs to be moved across.
This is an In-Cell LCD. The A7 (2018) was sold with a Super AMOLED screen, so brightness, colour and black levels may look a little different. The fingerprint sensor on this phone is in the side button, so it is not part of the screen. The listing is marked as the RU version, so please check your model code before ordering.
Compatibility
Specifications and compatibility
- Part
- In-Cell LCD Screen
- Compatible with
- Samsung Galaxy A7 (2018)
- Model numbers
- SM-A750F · SM-A750FN · SM-A750G
- Does not fit
- Galaxy A7 (2017), Galaxy A7 (2016) or any other model
- Fixes
- Cracked glass, a black display, lines or touch that does not respond
- Does not fix
- Battery, charging, camera or main board faults
- Quality
- Brand new, OEM-quality In-Cell LCD screen and digitiser assembly. Tested before dispatch.
- Brand
- Unbranded, compatible with Samsung Galaxy A7 (2018)
- In the box
- 1 × In-Cell LCD screen and digitiser assembly, black. Check the photos for any tools or adhesive included.
- Colour
- Black
- Installation
- Professional installation recommended
- Supplied by
- Supreme Phone Parts Ltd, Manchester, UK
Before you order
Is this the right part?
Signs it needs replacing
- The glass is cracked or chipped
- The display stays black while the phone still rings
- Lines, blotches or flicker appear on the screen
- Touch stops working in some areas
How to check your model
Open Settings › About phone. The model number should start SM-A750 (SM-A750F, SM-A750FN or SM-A750G).
The A7 (2018) has three rear cameras and a fingerprint sensor in the side button. The A7 (2017) has a home button on the front.
Professional installation
How a technician fits this part
- Power the phone off and warm the back cover to soften the adhesive.
- Remove the back cover, disconnect the battery and unplug the display flex.
- Warm the front and lift the old screen away from the frame.
- Clean the frame and lay new adhesive around the edge.
- Feed the new flex through, connect it and test display and touch.
- Press the screen into place, refit the back and run a final check.
Check that the part matches the device before fitting it or removing any adhesive backing. Once a part has been fitted, it cannot be returned for a change of mind. Faulty parts are always covered.
FAQ
Frequently asked questions
Will this fit my Galaxy A7 (2018)?
Yes, if your model number starts SM-A750. It is listed for SM-A750F, SM-A750FN and SM-A750G, marked as the RU version.
Does it fit the Galaxy A7 (2017)?
No. The A7 (2017), model SM-A720F, has a different screen and a front home button. This part is for the 2018 model only.
Will it look the same as my old screen?
Not exactly. This is an In-Cell LCD, and the A7 (2018) came with a Super AMOLED screen. Colours and brightness may differ slightly. The side fingerprint sensor is not affected.
Is it made by Samsung?
No. It is a brand new, OEM-quality In-Cell LCD assembly made to fit the Samsung Galaxy A7 (2018), and every part is tested before dispatch.
Should I fit it myself?
We recommend professional installation. The screen is glued in, so heat, thin tools and new adhesive are needed, and the battery must be disconnected first.
How quickly will it arrive?
Orders placed before 4pm on a working day are dispatched the same day from Manchester by Royal Mail Tracked. Delivery is free on UK orders from £5.
Prepared by the Supreme Phone Parts team, Manchester. Last updated September 2026.