Touch Screen Digitiser
Apple iPad 10th Gen 10.9 (2022) Touch Screen Digitiser Replacement
- Fits
- Apple iPad 10th Gen 10.9 (2022)
- Fixes
- Cracked touch glass
- Quality
- Brand new, OEM quality
- Fitting
- Professional install
Overview
What this part is
On the iPad 10th generation the touch glass sits on top of a separate LCD. If the glass is cracked or touch has stopped working but the picture is still clear, a new digitiser is all you need.
This part is the touch glass only. The cracked glass is removed from the frame with heat, and the new glass is fitted with fresh adhesive. Touch ID on this iPad is in the top button, so it is not affected by changing the glass.
Compatibility
Specifications and compatibility
- Part
- Touch Screen Digitiser
- Compatible with
- Apple iPad 10th Gen 10.9 (2022)
- Model numbers
- A2757 · A2777
- Does not fit
- iPad Air 4, iPad Air 5 or any other model
- Fixes
- Cracked or shattered front glass, and dead, jumpy or ghost touch
- Does not fix
- A black, lined or blotchy picture (LCD fault), battery or charging faults
- Quality
- Brand new, OEM-quality touch digitiser glass. Tested before dispatch.
- Brand
- Unbranded, compatible with Apple iPad 10th Gen 10.9 (2022)
- In the box
- 1 × touch digitiser glass (LCD not included).
- Colour
- As shown in the photos
- Installation
- Professional installation recommended
- Supplied by
- Supreme Phone Parts Ltd, Manchester, UK
Before you order
Is this the right part?
Signs it needs replacing
- The glass is cracked but the picture is still clear
- Parts of the screen do not respond to touch
- Apps open or type on their own
- Touch works only after pressing hard
How to check your model
Open Settings › General › About and tap Model Number until it shows an A-number. This glass is listed for A2757 and A2777. For the Wi-Fi model A2696, contact us before ordering.
The iPad 10th Gen has a 10.9-inch screen, a USB-C port and no home button.
Professional installation
How a technician fits this part
- Power the iPad off and warm the edges of the cracked glass.
- Lift the glass in small steps without pressing on the LCD beneath.
- Disconnect the battery, then the old digitiser cable.
- Clean all old adhesive and glass pieces from the frame.
- Connect the new glass and test touch across the whole screen before sealing.
- Apply new adhesive, press the glass down evenly and run a final check.
Check that the part matches the device before fitting it or removing any adhesive backing. Once a part has been fitted, it cannot be returned for a change of mind. Faulty parts are always covered.
FAQ
Frequently asked questions
Will this fit my iPad 10th Gen?
It is listed for models A2757 and A2777. Check the A-number in Settings › General › About. For A2696, contact us first.
Does it fit the iPad Air 4 or Air 5?
No. Those models use a bonded screen, so the glass cannot be replaced on its own.
Does it include the LCD?
No. This is the touch glass only. If your picture is black or lined, you need the LCD as well.
Is it made by Apple?
No. It is a brand new, OEM-quality touch digitiser glass made to fit the iPad 10th Gen, and it is tested before dispatch.
Should I fit it myself?
We recommend professional installation. Cracked glass must be lifted with heat and care so the LCD underneath is not damaged.
How quickly will it arrive?
Orders placed before 4pm on a working day are dispatched the same day from Manchester by Royal Mail Tracked. Delivery is free on UK orders from £5.
Prepared by the Supreme Phone Parts team, Manchester. Last updated September 2026.