Touch Screen Digitiser
Apple iPad 11th Gen (2025) Touch Screen Digitiser Replacement
- Fits
- Apple iPad 11th Gen (2025)
- Fixes
- Cracked touch glass
- Quality
- Brand new, OEM quality
- Fitting
- Professional install
Overview
What this part is
On the iPad 11th generation, the touch glass is a separate layer over the LCD. When the glass cracks or touch stops working but the picture stays clear, replacing the glass alone restores the iPad.
This part is the touch glass only. Fit it after testing, because once the adhesive is set the glass is hard to remove again. Touch ID on this iPad is in the top button, so changing the glass does not affect it.
Compatibility
Specifications and compatibility
- Part
- Touch Screen Digitiser
- Compatible with
- Apple iPad 11th Gen (2025)
- Model numbers
- A3354 · A3355 · A3356
- Does not fit
- iPad Air, iPad Pro, iPad mini or any other model
- Fixes
- Cracked or shattered glass, and unresponsive, jumpy or ghost touch
- Does not fix
- A black, lined or blotchy picture (LCD fault), battery or charging faults
- Quality
- Brand new, OEM-quality touch digitiser glass. Tested before dispatch.
- Brand
- Unbranded, compatible with Apple iPad 11th Gen (2025)
- In the box
- 1 × touch digitiser glass (LCD not included).
- Colour
- As shown in the photos
- Installation
- Professional installation recommended
- Supplied by
- Supreme Phone Parts Ltd, Manchester, UK
Before you order
Is this the right part?
Signs it needs replacing
- The front glass is cracked but the picture is fine
- Touch has stopped working in a strip or corner
- The iPad taps or scrolls on its own
- Swipes and gestures are slow to register
How to check your model
Open Settings › General › About and tap Model Number until it shows an A-number. It should be A3354, A3355 or A3356.
The iPad 11th Gen (2025) and the 10th Gen (2022) look very similar, so the A-number is the safest check.
Professional installation
How a technician fits this part
- Power the iPad off and warm the edges of the cracked glass.
- Work the glass free slowly, protecting the LCD underneath.
- Disconnect the battery and then the old glass cable.
- Connect the new glass and test touch in every area before sealing.
- Remove all old adhesive and apply new strips around the frame.
- Press the glass down evenly and run a final check of touch and display.
Check that the part matches the device before fitting it or removing any adhesive backing. Once a part has been fitted, it cannot be returned for a change of mind. Faulty parts are always covered.
FAQ
Frequently asked questions
Will this fit my iPad 11th Gen?
Yes, if the A-number is A3354, A3355 or A3356. Check it in Settings › General › About.
Does it fit the iPad 10th Gen?
We list a separate touch glass for the iPad 10th Gen (2022). Please order the part listed for your A-number.
Do I need to replace the LCD too?
Only if the picture is black, lined or blotchy. If you can see the screen clearly, the glass alone is enough.
Is it made by Apple?
No. It is a brand new, OEM-quality touch digitiser glass made to fit the iPad 11th Gen (2025), and it is tested before dispatch.
Should I fit it myself?
We recommend professional installation. Test-fit the glass first, as it is hard to remove once the adhesive has set.
How quickly will it arrive?
Orders placed before 4pm on a working day are dispatched the same day from Manchester by Royal Mail Tracked. Delivery is free on UK orders from £5.
Prepared by the Supreme Phone Parts team, Manchester. Last updated September 2026.