Front Camera
iPhone 13 Pro Max Front Camera Replacement
- Fits
- iPhone 13 Pro Max
- Fixes
- Faulty selfie camera
- Quality
- Brand new, OEM quality
- Fitting
- Professional install
Overview
What this part is
The front camera on the iPhone 13 Pro Max sits at the top of the phone, behind the screen, next to the earpiece and sensors. When it fails, the selfie view may be blurry, black or stuck, or the camera app may switch only to the rear cameras.
This part is the front camera module and its flex cable. Fitting it means opening the phone and lifting the display, so the work suits a trained technician. It covers the selfie camera only. It is not a Face ID repair.
Compatibility
Specifications and compatibility
- Part
- Front Camera
- Compatible with
- iPhone 13 Pro Max
- Model numbers
- A2484 · A2641 · A2643 · A2644 · A2645
- Does not fit
- iPhone 13 Pro, iPhone 12 Pro Max, iPhone 14 Pro Max or any other model
- Fixes
- A blurry, dark or black selfie camera, and FaceTime video that will not start
- Does not fix
- Face ID faults, rear camera faults, cracked screens or motherboard faults
- Quality
- Brand new, OEM-quality front camera module with flex cable. Tested before dispatch.
- Brand
- Unbranded, compatible with iPhone 13 Pro Max
- In the box
- 1 × front camera module with flex cable. Tools are not included.
- Colour
- As shown in the photos
- Installation
- Professional installation recommended
- Supplied by
- Supreme Phone Parts Ltd, Manchester, UK
Before you order
Is this the right part?
Signs it needs replacing
- Selfie photos are blurry or out of focus
- The front camera shows a black screen
- FaceTime video will not start or freezes
- The camera app will not switch to the front camera
How to check your model
Open Settings › General › About. The Model Name should read iPhone 13 Pro Max. Tap the Model Number to see the A-number (A2484, A2641, A2643, A2644, A2645).
The iPhone 13 Pro Max has a 6.7-inch screen and three rear cameras. The iPhone 13 Pro has the same camera layout but a smaller 6.1-inch screen.
Professional installation
How a technician fits this part
- Power off the iPhone 13 Pro Max, remove the two screws beside the charging port and warm the screen edges to soften the adhesive.
- Lift the display carefully and disconnect the battery before anything else.
- Remove the bracket over the top sensors and unplug the old front camera.
- Fit the new camera, reconnect it and refit the bracket.
- Reconnect the display and battery, then test selfie photos and FaceTime video.
- Seal the phone with new adhesive and press evenly while it sets.
Check that the part matches the device before fitting it or removing any adhesive backing. Once a part has been fitted, it cannot be returned for a change of mind. Faulty parts are always covered.
FAQ
Frequently asked questions
Will this fit my iPhone 13 Pro Max?
Yes, if Settings › General › About shows iPhone 13 Pro Max. It is listed for models A2484, A2641, A2643, A2644 and A2645.
Does it fit the iPhone 13 Pro?
We list this front camera for the iPhone 13 Pro Max only. The iPhone 13 Pro is a different model, so please choose the part listed for it.
Will this fix Face ID?
No. This part is the selfie camera used for photos and FaceTime. Face ID uses separate sensors, so a Face ID fault needs a different repair.
Is it made by Apple?
No. It is a brand new, OEM-quality front camera made to fit the iPhone 13 Pro Max, and it is tested before dispatch.
Should I fit it myself?
We recommend professional installation. The front camera sits behind the screen of the iPhone 13 Pro Max, so the display must be lifted and the battery disconnected safely.
How quickly will it arrive?
Orders placed before 4pm on a working day are dispatched the same day from Manchester by Royal Mail Tracked. Delivery is free on UK orders from £5.
Prepared by the Supreme Phone Parts team, Manchester. Last updated September 2026.