LCD Screen
Samsung Galaxy A13 (SM-A137) LCD Screen Replacement
- Fits
- Samsung Galaxy A13 (SM-A137)
- Fixes
- Broken display
- Quality
- Brand new, OEM quality
- Fitting
- Professional install
Overview
What this part is
Samsung made two versions of the Galaxy A13 4G. This screen is for the later SM-A137 version only. Its 6.6-inch LCD panel, touch layer and cover glass are bonded together, so a crack, dead touch area or lines on the picture mean the whole assembly needs changing.
The screen comes without a mid-frame and is glued into your existing frame with new adhesive. Check the model number carefully before ordering, because the SM-A135 and SM-A137 look almost the same from the outside.
Compatibility
Specifications and compatibility
- Part
- LCD Screen
- Compatible with
- Samsung Galaxy A13 (SM-A137)
- Model numbers
- SM-A137
- Does not fit
- Galaxy A13 SM-A135, Galaxy A13 5G or any other model
- Fixes
- Cracked glass, a black or flickering display, lines, dark patches or dead touch areas
- Does not fix
- Charging, battery, camera, button or motherboard faults
- Quality
- Brand new, OEM-quality LCD screen and digitiser assembly. Tested before dispatch.
- Brand
- Unbranded, compatible with Samsung Galaxy A13 (SM-A137)
- In the box
- 1 × LCD screen assembly. Check the photos for any tools or adhesive included.
- Colour
- As shown in the photos
- Installation
- Professional installation recommended
- Supplied by
- Supreme Phone Parts Ltd, Manchester, UK
Before you order
Is this the right part?
Signs it needs replacing
- The glass is cracked or shattered
- The screen stays black while the phone rings or vibrates
- Lines, flicker, dark patches or discoloured areas appear
- Touch does not respond in some areas, or registers ghost touches
How to check your model
Open Settings › About phone. The model name should read Galaxy A13. The model number (it starts SM-) should be SM-A137.
The SM-A135 and SM-A137 look almost the same but use different screens. Always check the model number.
Professional installation
How a technician fits this part
- Power the phone off, warm the back cover gently and lift it off.
- Remove the board cover and disconnect the battery before anything else.
- Disconnect the screen flex, then heat the screen edges and lift the old display out of the frame.
- Clean all old adhesive and glass from the frame, then apply new adhesive.
- Feed the new screen flex through, connect it and test display and touch before sealing.
- Press the screen in evenly, refit the covers and check calls, speakers, cameras and charging.
Check that the part matches the device before fitting it or removing any adhesive backing. Once a part has been fitted, it cannot be returned for a change of mind. Faulty parts are always covered.
FAQ
Frequently asked questions
Will this fit my Galaxy A13?
Yes, if Settings › About phone shows Galaxy A13 with model number SM-A137. It does not fit the Galaxy A13 SM-A135 or Galaxy A13 5G.
Does it fit the Galaxy A13 with model number SM-A135?
No. The SM-A135 is the earlier Galaxy A13 4G version and uses a different screen. We sell a separate screen for it.
Does it come with a frame?
No. This is the screen and digitiser only. It is glued into your existing Galaxy A13 SM-A137 frame, so the frame must be straight and undamaged. If the frame is bent, it will need replacing too, so contact us before ordering.
Is it made by Samsung?
No. It is a brand new, OEM-quality LCD screen and digitiser assembly made to fit the Samsung Galaxy A13 (SM-A137), and every part is tested before dispatch.
Should I fit it myself?
We recommend professional installation. Opening the Galaxy A13 needs heat, the right tools and new adhesive, and the battery must be disconnected safely.
How quickly will it arrive?
Orders placed before 4pm on a working day are dispatched the same day from Manchester by Royal Mail Tracked. Delivery is free on UK orders from £5. Returns are accepted within 30 days from receipt.
Prepared by the Supreme Phone Parts team, Manchester. Last updated September 2026.