Charging Port Connector
OnePlus 3 Charging Port Connector Replacement
- Fits
- OnePlus 3
- Fixes
- Charging faults
- Quality
- Brand new, OEM quality
- Fitting
- Professional install
Overview
What this part is
The OnePlus 3 and 3T use the same USB-C socket for charging and data. Over time the contacts wear, the socket loosens, or pins break, and the cable only charges at an angle or not at all.
This part is the bare connector only. The old socket has to be removed from the board with hot air and the new one soldered in its place, so this is a micro-soldering job. If cleaning the port with a plastic pick does not help and the socket is loose or damaged, this is the part that replaces it.
Compatibility
Specifications and compatibility
- Part
- Charging Port Connector
- Compatible with
- OnePlus 3
- Model numbers
- A3000 · A3003 · A3010
- Does not fit
- OnePlus 5, OnePlus 5T, OnePlus 6 or any other model
- Fixes
- A loose, worn or damaged USB-C socket, slow or intermittent charging, and data connection faults
- Does not fix
- Battery, screen or board faults beyond the socket, or a faulty charger or cable
- Quality
- Brand new, OEM-quality USB-C charging port connector. Tested before dispatch.
- Brand
- Unbranded, compatible with OnePlus 3
- In the box
- 1 × USB-C charging port connector. Check the photos for any extra items.
- Colour
- As shown in the photos
- Installation
- Professional installation recommended
- Supplied by
- Supreme Phone Parts Ltd, Manchester, UK
Before you order
Is this the right part?
Signs it needs replacing
- The cable only charges when held at an angle
- The phone does not charge or is not seen by a computer
- The socket feels loose or pins are bent or missing
- Charging stops and starts on its own
How to check your model
Open Settings › About phone and check the model reads OnePlus 3 or OnePlus 3T. The model number (A3000, A3003 or A3010) is shown there and on the box. Compare your old socket with the photos before fitting.
Professional installation
How a technician fits this part
- Clean the port first and try another cable and charger to rule them out.
- Power the phone off, open the back cover and disconnect the battery.
- Remove the board, then remove the old socket with hot air and clean the pads.
- Solder the new connector in place and check every pin for bridges.
- Refit the board, reconnect the battery and test charging and data before closing.
Check that the part matches the device before fitting it or removing any adhesive backing. Once a part has been fitted, it cannot be returned for a change of mind. Faulty parts are always covered.
FAQ
Frequently asked questions
Will this fit my OnePlus 3?
Yes, if Settings › About phone shows OnePlus 3 or OnePlus 3T. It is listed for models A3000, A3003 and A3010.
Does it fit the OnePlus 5?
No. The OnePlus 5 uses a different charging flex cable. This connector is listed only for the OnePlus 3 and 3T.
Does it fit both the OnePlus 3 and 3T?
Yes. The supplier lists this connector for the OnePlus 3 (A3000) and OnePlus 3T (A3010). It does not fit the OnePlus 5 or later models.
Is it made by OnePlus?
No. It is a brand new, OEM-quality charging port connector made to fit the OnePlus 3, and it is tested before dispatch.
Should I fit it myself?
We recommend professional installation. This is a bare connector that must be soldered to the board, which needs hot air, flux and micro-soldering skills. A poor joint can damage the board.
How quickly will it arrive?
Orders placed before 4pm on a working day are dispatched the same day from Manchester by Royal Mail Tracked. Delivery is free on UK orders over £5. You can also collect from our shop at 33 Moulton Street, Manchester M8 8FQ.
Prepared by the Supreme Phone Parts team, Manchester. Last updated September 2026.