LCD Screen
Samsung Galaxy A32 4G LCD Screen Replacement
- Fits
- Samsung Galaxy A32 4G
- Fixes
- Broken display
- Quality
- Brand new, OEM quality
- Fitting
- Professional install
Overview
What this part is
The Samsung Galaxy A32 4G display is one bonded unit: the cover glass, touch digitiser and display panel cannot be separated. If the glass is cracked, touch stops responding, or the picture shows lines or black patches, the whole assembly needs replacing.
This version is the screen assembly only, without a frame. It is bonded to the existing mid-frame with new adhesive. The A32 4G shipped with a Super AMOLED screen and an optical fingerprint sensor under it. This is an LCD replacement, so the fingerprint sensor may not work, and colour and brightness may differ.
Compatibility
Specifications and compatibility
- Part
- LCD Screen
- Compatible with
- Samsung Galaxy A32 4G
- Model numbers
- SM-A325F
- Does not fit
- Galaxy A32 5G (SM-A326B), A31 or A22 4G or any other model
- Fixes
- Cracked glass, a black or flickering display, lines or dead touch areas
- Does not fix
- Charging, battery, camera or main board faults
- Quality
- Brand new, OEM-quality LCD screen and digitiser assembly. Tested before dispatch.
- Brand
- Unbranded, compatible with Samsung Galaxy A32 4G
- In the box
- 1 × A32 4G LCD screen assembly. Check the photos for any tools or adhesive included.
- Colour
- As shown in the photos
- Installation
- Professional installation recommended
- Supplied by
- Supreme Phone Parts Ltd, Manchester, UK
Before you order
Is this the right part?
Signs it needs replacing
- The glass is cracked or shattered
- The screen stays black while the phone rings or vibrates
- Lines, flicker, ink spots or dark patches appear
- Touch does not respond in some areas, or registers ghost touches
How to check your model
Open Settings › About phone. The model name should read Galaxy A32 4G. The model number (SM-A325F) is shown under Settings › About phone and on the label or box.
The A32 4G has four rear cameras set in separate rings, and a 6.4-inch screen.
Professional installation
How a technician fits this part
- Power off the A32 4G and warm the screen edges to soften the adhesive.
- Open the phone and disconnect the battery before touching the display flex.
- Remove the damaged screen and clean all old adhesive from the frame.
- Connect the new screen and test display, touch and brightness before bonding.
- Apply new adhesive, seat the screen and press evenly while it cures.
- Run a final check: display, touch, calls, speakers, cameras and charging.
Check that the part matches the device before fitting it or removing any adhesive backing. Once a part has been fitted, it cannot be returned for a change of mind. Faulty parts are always covered.
FAQ
Frequently asked questions
Will this fit my A32 4G?
Yes, if Settings › About phone shows Galaxy A32 4G and the model number starts SM-A325F.
Does it fit the Galaxy A31?
No. The A31 is an older model with a different screen. This part fits the Galaxy A32 4G (SM-A325F) only.
Is the frame included?
No. This is the screen assembly only, bonded to your existing frame with new adhesive. A version pre-fitted to a new frame is listed separately.
Is it made by Samsung?
No. It is a brand new, OEM-quality LCD assembly made to fit the Samsung Galaxy A32 4G, and it is tested before dispatch.
Should I fit it myself?
We recommend professional installation. Opening the A32 4G needs heat, the right tools and new adhesive, and the battery must be disconnected safely.
How quickly will it arrive?
Orders placed before 4pm on a working day are dispatched the same day from Manchester by Royal Mail Tracked. Delivery is free on UK orders from £5.
Prepared by the Supreme Phone Parts team, Manchester. Last updated September 2026.