Super AMOLED Screen
Samsung Galaxy A30s Super AMOLED Screen Replacement
- Fits
- Samsung Galaxy A30s
- Fixes
- Broken display
- Quality
- Brand new, OEM quality
- Fitting
- Professional install
Overview
What this part is
The Samsung Galaxy A30s display is one bonded unit: the cover glass, touch digitiser and display panel cannot be separated. If the glass is cracked, touch stops responding, or the picture shows lines or black patches, the whole assembly needs replacing.
This version is the screen assembly only, without a frame. It is bonded to the existing mid-frame with new adhesive. The Galaxy A30s shipped with a Super AMOLED screen, and this replacement is described as Super AMOLED material. The A30s has an in-screen fingerprint sensor. We cannot confirm it works with this replacement, so plan to use face recognition or a PIN if it does not.
Compatibility
Specifications and compatibility
- Part
- Super AMOLED Screen
- Compatible with
- Samsung Galaxy A30s
- Model numbers
- SM-A307
- Does not fit
- Galaxy A30 (SM-A305), A50 or A31 or any other model
- Fixes
- Cracked glass, a black or flickering display, lines or dead touch areas
- Does not fix
- Charging, battery, camera or main board faults
- Quality
- Brand new, OEM-quality Super AMOLED screen and digitiser assembly. Tested before dispatch.
- Brand
- Unbranded, compatible with Samsung Galaxy A30s
- In the box
- 1 × A30s Super AMOLED screen assembly. Check the photos for any tools or adhesive included.
- Colour
- As shown in the photos
- Installation
- Professional installation recommended
- Supplied by
- Supreme Phone Parts Ltd, Manchester, UK
Before you order
Is this the right part?
Signs it needs replacing
- The glass is cracked or shattered
- The screen stays black while the phone rings or vibrates
- Lines, green or purple patches, or dark spots appear
- Touch does not respond in some areas, or registers ghost touches
How to check your model
Open Settings › About phone. The model name should read Galaxy A30s. The model number (SM-A307) is shown under Settings › About phone and on the label or box.
The Galaxy A30s has a 6.4-inch screen, three rear cameras and no fingerprint sensor on the back.
Professional installation
How a technician fits this part
- Power off the A30s and warm the screen edges to soften the adhesive.
- Open the phone and disconnect the battery before touching the display flex.
- Remove the damaged screen and clean all old adhesive from the frame.
- Connect the new screen and test display, touch and brightness before bonding.
- Apply new adhesive, seat the screen and press evenly while it cures.
- Run a final check: display, touch, calls, speakers, cameras and charging.
Check that the part matches the device before fitting it or removing any adhesive backing. Once a part has been fitted, it cannot be returned for a change of mind. Faulty parts are always covered.
FAQ
Frequently asked questions
Will this fit my A30s?
Yes, if Settings › About phone shows Galaxy A30s and the model number starts SM-A307.
Does it fit the Galaxy A30?
No. The A30 (SM-A305) has a rear fingerprint sensor and a different screen. This assembly is for the Galaxy A30s (SM-A307).
Will the in-screen fingerprint sensor work?
We cannot confirm it. The fingerprint reader sits under the display, and not every replacement supports it. Your PIN, pattern and face recognition are not affected.
Is it made by Samsung?
No. It is a brand new, OEM-quality Super AMOLED assembly made to fit the Samsung Galaxy A30s, and it is tested before dispatch.
Should I fit it myself?
We recommend professional installation. Opening the A30s needs heat, the right tools and new adhesive, and the battery must be disconnected safely.
How quickly will it arrive?
Orders placed before 4pm on a working day are dispatched the same day from Manchester by Royal Mail Tracked. Delivery is free on UK orders from £5.
Prepared by the Supreme Phone Parts team, Manchester. Last updated September 2026.