Signal Antenna Flex Cable
Samsung Galaxy S20+ Signal Antenna Flex Cable Replacement
- Fits
- Samsung Galaxy S20+
- Fixes
- Weak signal
- Quality
- Brand new, OEM quality
- Fitting
- Professional install
Overview
What this part is
Inside the Galaxy S20+, a thin signal flex cable links the main board to the antenna. If it is pinched, torn or left unplugged after a repair, the phone can show weak signal, drop calls or lose service altogether.
Before replacing it, check the SIM card in another phone and reset network settings. If the fault started after a drop or a repair, a new signal flex cable is a common fix.
Compatibility
Specifications and compatibility
- Part
- Signal Antenna Flex Cable
- Compatible with
- Samsung Galaxy S20+
- Model numbers
- SM-G985F · SM-G986B
- Does not fit
- Galaxy S20, S20 Ultra or S21+
- Fixes
- Weak or no signal and dropped calls caused by a damaged signal flex cable
- Does not fix
- SIM card faults, network outages or motherboard faults
- Quality
- Brand new, OEM-quality signal Antenna Flex Cable. Tested before dispatch.
- Brand
- Unbranded, compatible with Samsung Galaxy S20+
- In the box
- 1 × signal antenna flex cable. Check the photos for any extra items.
- Colour
- As shown in the photos
- Installation
- Professional installation recommended
- Supplied by
- Supreme Phone Parts Ltd, Manchester, UK
Before you order
Is this the right part?
Signs it needs replacing
- Signal bars are low where other phones are fine
- Calls drop or data is slow in good coverage
- The phone shows No service after a drop or repair
- The signal flex cable is visibly torn or pinched
How to check your model
Open Settings › About phone. The name should read Galaxy S20+ and the model number should be SM-G985F and SM-G986B (UK models start SM-). Compare your old part with the photos before fitting.
Professional installation
How a technician fits this part
- Power the phone off and remove the SIM tray.
- Warm the back glass edges and lift it off carefully with a thin pick.
- Remove the screws and the inner cover over the main board, then disconnect the battery.
- Unplug the old signal flex cable at both ends, route the new cable the same way and press each connector home.
- Reconnect the battery and test signal, calls and mobile data before closing.
- Refit the inner cover and screws, apply new back adhesive and press the back glass on evenly.
Check that the part matches the device before fitting it or removing any adhesive backing. Once a part has been fitted, it cannot be returned for a change of mind. Faulty parts are always covered.
FAQ
Frequently asked questions
Will this fit my S20+?
Yes, if Settings › About phone shows Samsung Galaxy S20+ (SM-G985F and SM-G986B). It does not fit the Galaxy S20, S20 Ultra or S21+.
Does it fit the Galaxy S20 or S20 Ultra?
No. This cable is listed for the Galaxy S20+ only.
Will this fix a phone that says No SIM?
Not usually. A No SIM message points to the SIM card, the SIM reader or the board. This cable affects signal strength.
Is it made by Samsung?
No. It is a brand new, OEM-quality part made to fit the Samsung Galaxy S20+, and it is tested before dispatch.
Should I fit it myself?
We recommend professional installation. The back glass has to be heated and lifted, the battery must be disconnected first, and small flex cables are easy to damage.
How quickly will it arrive?
Orders placed before 4pm on a working day are dispatched the same day from Manchester by Royal Mail Tracked. Delivery is free on UK orders over £5. You can also collect from our shop at 33 Moulton Street, Manchester M8 8FQ.
Prepared by the Supreme Phone Parts team, Manchester. Last updated September 2026.





