Display Flex Cable
Samsung Galaxy S26+ Display Flex Cable Replacement
- Fits
- Samsung Galaxy S26+
- Fixes
- Display flex damage
- Quality
- Brand new, OEM quality
- Fitting
- Professional install
Overview
What this part is
The display flex cable on the Galaxy S26+ carries the picture and touch signals between the screen and the main board. It can tear during a repair, or be damaged by a drop or liquid. A damaged flex can cause a black screen, lines, flicker or touch faults even when the screen panel itself is fine.
This is a technician's part. Fitting it usually involves careful work on the display connection, so it is best suited to repair shops with micro-soldering tools. If the screen glass or panel is cracked, a full screen replacement is the better fix.
Compatibility
Specifications and compatibility
- Part
- Display Flex Cable
- Compatible with
- Samsung Galaxy S26+
- Model numbers
- SM-S947B
- Does not fit
- Galaxy S26, Galaxy S26 Ultra, Galaxy S25+ or any other model
- Fixes
- A torn or damaged display flex causing a black screen, lines, flicker or lost touch
- Does not fix
- A cracked or bleeding screen panel, or main board faults
- Quality
- Brand new, OEM-quality display flex cable. Tested before dispatch.
- Brand
- Unbranded, compatible with Samsung Galaxy S26+
- In the box
- 1 × display flex cable for Galaxy S26+.
- Colour
- As shown in the photos
- Installation
- Professional installation recommended
- Supplied by
- Supreme Phone Parts Ltd, Manchester, UK
Before you order
Is this the right part?
Signs it needs replacing
- The screen stays black but the phone still rings
- Lines or flicker appear after a repair or drop
- Touch stops working while the picture looks fine
- The display flex is visibly torn or creased
How to check your model
Open Settings › About phone. The model name should read Galaxy S26+, and the model number starts SM-. This part is made for the SM-S947B.
The Galaxy S26+ and Galaxy S25+ look alike. Check the model number: the S26+ starts SM-S947.
Professional installation
How a technician fits this part
- Power the phone off and open it following the usual screen repair steps.
- Disconnect the battery before anything else.
- Inspect the old flex and confirm it is the cause of the fault.
- Remove the damaged flex and prepare the contact points.
- Fit the new flex, soldering where required, and check every joint.
- Reconnect the display and battery, then test picture, brightness and touch before closing.
Check that the part matches the device before fitting it or removing any adhesive backing. Once a part has been fitted, it cannot be returned for a change of mind. Faulty parts are always covered.
FAQ
Frequently asked questions
Will this fit my Galaxy S26+?
Yes, if Settings › About phone shows Galaxy S26+ and the model number is SM-S947B. It does not fit the Galaxy S26 or Galaxy S26 Ultra.
Does it fit the Galaxy S25+?
No. The Galaxy S25+ uses a different display flex cable. This part is made only for the Galaxy S26+.
Can I fit this without soldering?
It needs a steady hand and repair experience. Many technicians fit it with micro-soldering tools. If you are not a technician, we recommend a professional repair shop.
Is it made by Samsung?
No. It is a brand new, OEM-quality display flex cable made to fit the Samsung Galaxy S26+, and every part is tested before dispatch.
Should I fit it myself?
We recommend professional installation by a technician with micro-soldering experience. A mistake can damage the screen or main board.
How quickly will it arrive?
Orders placed before 4pm on a working day are dispatched the same day from Manchester by Royal Mail Tracked. Delivery is free on UK orders over £5. You can also collect from our shop at 33 Moulton Street, Manchester M8 8FQ.
Prepared by the Supreme Phone Parts team, Manchester. Last updated September 2026.