Power and Volume Button Flex Cable
Xiaomi Poco F2 Pro Power and Volume Button Flex Cable Replacement
- Fits
- Xiaomi Poco F2 Pro
- Fixes
- Button faults
- Quality
- Brand new, OEM quality
- Fitting
- Professional install
Overview
What this part is
Inside the Xiaomi Poco F2 Pro, the power and volume buttons press on small switches mounted on a thin flex cable along the side of the frame. Drops, wear and moisture can crack the flex or wear out a switch, so a button stops clicking or does nothing.
This part replaces that flex cable. The same flex is used in the Redmi K30 Pro. It does not include the outer button caps, which usually stay in the frame. If the power button also holds a fingerprint sensor on your phone, compare the old part with the photos before fitting.
Compatibility
Specifications and compatibility
- Part
- Power and Volume Button Flex Cable
- Compatible with
- Xiaomi Poco F2 Pro
- Model numbers
- Check Settings › About phone
- Does not fit
- Poco F3, Redmi K30 or Poco X2 or any other model
- Fixes
- Power or volume buttons that do not respond, stick or work only some of the time
- Does not fix
- A bent frame, missing button caps, software faults or a battery or main board fault
- Quality
- Brand new, OEM-quality power and volume button flex cable for the Xiaomi Poco F2 Pro. Tested before dispatch.
- Brand
- Unbranded, compatible with Xiaomi Poco F2 Pro
- In the box
- 1 × power and volume button flex cable. Check the photos for any extra items.
- Colour
- As shown in the photos
- Installation
- Professional installation recommended
- Supplied by
- Supreme Phone Parts Ltd, Manchester, UK
Before you order
Is this the right part?
Signs it needs replacing
- The power button does not respond or needs a hard press
- Volume up or down does nothing
- A button works only some of the time
- The phone turns the screen on or off by itself
How to check your model
Open Settings › About phone. The device name should read POCO F2 Pro. The model number is shown under Settings › About phone › All specs. Compare your old part with the photos before fitting.
The Poco F2 Pro (model M2004J11G) has a pop-up front camera and a round rear camera housing.
Professional installation
How a technician fits this part
- Power the phone off and remove the SIM tray.
- Warm the Xiaomi Poco F2 Pro back cover to soften the adhesive and lift it off slowly.
- Disconnect the battery before touching any other connector.
- Unplug and carefully peel the old button flex away from the side of the frame.
- Fit the new flex in the same position so each switch lines up under its button.
- Reconnect the battery, test power and both volume buttons, then close the phone.
Check that the part matches the device before fitting it or removing any adhesive backing. Once a part has been fitted, it cannot be returned for a change of mind. Faulty parts are always covered.
FAQ
Frequently asked questions
Will this fit my POCO F2 Pro?
Yes, if Settings › About phone shows POCO F2 Pro. It does not fit the Poco F3, Redmi K30 or Poco X2.
Does it fit the Redmi K30 Pro?
Yes. The Redmi K30 Pro is the Chinese version of the Poco F2 Pro and uses the same button flex. It does not fit the standard Redmi K30.
Does it include the button caps?
No. This is the flex cable with the switches. The outer button caps normally stay in the phone and are reused.
Is it made by Xiaomi?
No. It is a brand new, OEM-quality power and volume button flex cable made to fit the Xiaomi Poco F2 Pro, and it is tested before dispatch.
Should I fit it myself?
We recommend professional installation. The back cover is glued on and needs heat to remove, and the battery must be disconnected first.
How quickly will it arrive?
Orders placed before 4pm on a working day are dispatched the same day from Manchester by Royal Mail Tracked. Delivery is free on UK orders over £5. You can also collect from our shop at 33 Moulton Street, Manchester M8 8FQ.
Prepared by the Supreme Phone Parts team, Manchester. Last updated September 2026.