Power and Volume Button Flex Cable
Xiaomi Poco X6 Pro Power and Volume Button Flex Cable Replacement
- Fits
- Xiaomi Poco X6 Pro
- Fixes
- Button faults
- Quality
- Brand new, OEM quality
- Fitting
- Professional install
Overview
What this part is
Inside the Xiaomi Poco X6 Pro, the power and volume buttons press on small switches mounted on a thin flex cable. Drops, wear and moisture can crack the flex or wear out a switch, so a button stops clicking or does nothing.
This part replaces that flex cable. It does not include the outer button caps, which usually stay in the frame. If a button is stuck because the frame is bent, the frame may also need attention.
Compatibility
Specifications and compatibility
- Part
- Power and Volume Button Flex Cable
- Compatible with
- Xiaomi Poco X6 Pro
- Model numbers
- Check Settings › About phone
- Does not fit
- Poco X6, Poco X6 Neo, Poco F6 or any other model
- Fixes
- Power or volume buttons that do not respond, stick or work only some of the time
- Does not fix
- A bent frame, software faults or a phone that will not turn on because of a battery or main board fault
- Quality
- Brand new, OEM-quality power and volume button flex cable. Tested before dispatch.
- Brand
- Unbranded, compatible with Xiaomi Poco X6 Pro
- In the box
- 1 × power and volume button flex cable. Check the photos for any extra items.
- Colour
- As shown in the photos
- Installation
- Professional installation recommended
- Supplied by
- Supreme Phone Parts Ltd, Manchester, UK
Before you order
Is this the right part?
Signs it needs replacing
- The power button does not respond or needs a hard press
- Volume up or down does nothing
- A button works only some of the time
- The screen turns on or off by itself
How to check your model
Open Settings › About phone. The device name should read Poco X6 Pro. The model number is also shown there. Compare your old part with the photos before fitting.
The Poco X6 Pro has three rear cameras in a large rectangular camera bar. The Poco X6 looks similar, so check the name carefully.
Professional installation
How a technician fits this part
- Power the phone off.
- Remove the SIM tray, then release the back cover carefully with a thin pick, warming the edges first if it is glued.
- Remove the screws and inner cover, then disconnect the battery before touching any other connector.
- Unplug and carefully lift the old button flex from the side of the Poco X6 Pro frame.
- Fit the new flex in the same position so each switch lines up under its button.
- Reconnect the battery, test power and both volume buttons, then close the phone.
Check that the part matches the device before fitting it or removing any adhesive backing. Once a part has been fitted, it cannot be returned for a change of mind. Faulty parts are always covered.
FAQ
Frequently asked questions
Will this fit my Poco X6 Pro?
Yes, if Settings › About phone shows Poco X6 Pro. It does not fit the Poco X6, Poco X6 Neo, Poco F6 or any other model.
Does it fit the Poco X6?
No. The Poco X6 is a different phone with a different internal layout. This part is for the Poco X6 Pro only.
Does it include the button caps?
No. This is the flex cable with the switches. The outer button caps normally stay in the phone and are reused.
Is it made by Xiaomi?
No. It is a brand new, OEM-quality power and volume button flex cable made to fit the Xiaomi Poco X6 Pro, and it is tested before dispatch.
Should I fit it myself?
We recommend professional installation. The back cover must be removed carefully and the battery disconnected first.
How quickly will it arrive?
Orders placed before 4pm on a working day are dispatched the same day from Manchester by Royal Mail Tracked. Delivery is free on UK orders over £5. You can also collect from our shop at 33 Moulton Street, Manchester M8 8FQ.
Prepared by the Supreme Phone Parts team, Manchester. Last updated September 2026.