Charging Port Board
Xiaomi Redmi 13C Charging Port Board Replacement
- Fits
- Xiaomi Redmi 13C
- Fixes
- Charging faults
- Quality
- Brand new, OEM quality
- Fitting
- Professional install
Overview
What this part is
On the Xiaomi Redmi 13C, the USB-C charging socket sits on a small board at the bottom of the phone. Daily plugging in, fluff and moisture wear the socket, so charging can cut in and out when the cable moves.
Replacing the board gives you a fresh socket. Try a different cable and plug and clean the port gently first, as a bad cable is a common cause. If the phone still does not charge with a new board, the battery or main board may need checking.
Compatibility
Specifications and compatibility
- Part
- Charging Port Board
- Compatible with
- Xiaomi Redmi 13C
- Model numbers
- Check Settings › About phone
- Does not fit
- Redmi 13C 5G, Redmi 12C or any other model
- Fixes
- A loose, worn or damaged charging socket, slow or no charging, and a phone that a computer does not see
- Does not fix
- A worn battery, a faulty charger or cable, or main board charging faults
- Quality
- Brand new, OEM-quality charging port board. Tested before dispatch.
- Brand
- Unbranded, compatible with Xiaomi Redmi 13C
- In the box
- 1 × charging port board. Check the photos for any extra items.
- Colour
- As shown in the photos
- Installation
- Professional installation recommended
- Supplied by
- Supreme Phone Parts Ltd, Manchester, UK
Before you order
Is this the right part?
Signs it needs replacing
- The phone only charges when the cable is held at an angle
- Charging starts and stops when the cable moves
- The phone does not charge with a known good cable and plug
- A computer does not see the phone when connected
How to check your model
Open Settings › About phone. The device name should read Redmi 13C. The model number is also shown there. Compare your old part with the photos before fitting.
The Redmi 13C was sold in 4G and 5G versions, which are different phones. Make sure your phone shows Redmi 13C and not Redmi 13C 5G.
Professional installation
How a technician fits this part
- Power the phone off.
- Remove the SIM tray, then release the back cover carefully with a thin pick, warming the edges first if it is glued.
- Remove the screws and inner panel covering the bottom of the phone.
- Disconnect the battery before touching any other connector.
- Unplug the board's flex cables, lift out the old Redmi 13C board and fit the new one in the same place.
- Reconnect the battery, test charging and data, then refit the panel and close the phone.
Check that the part matches the device before fitting it or removing any adhesive backing. Once a part has been fitted, it cannot be returned for a change of mind. Faulty parts are always covered.
FAQ
Frequently asked questions
Will this fit my Redmi 13C?
Yes, if Settings › About phone shows Redmi 13C. It does not fit the Redmi 13C 5G, Redmi 12C or any other model.
Does it fit the Redmi 13C 5G?
No. The Redmi 13C 5G is a different phone with a different internal layout. This part is for the 4G Redmi 13C.
Should I try cleaning the port first?
Yes. Fluff in the socket often stops the plug going fully in. Clean it gently with a wooden or plastic pick, never metal, and try another cable. If charging is still faulty, the board needs replacing.
Is it made by Xiaomi?
No. It is a brand new, OEM-quality charging port board made to fit the Xiaomi Redmi 13C, and it is tested before dispatch.
Should I fit it myself?
We recommend professional installation. The back cover must be removed carefully and the battery disconnected before the board is unplugged.
How quickly will it arrive?
Orders placed before 4pm on a working day are dispatched the same day from Manchester by Royal Mail Tracked. Delivery is free on UK orders over £5. You can also collect from our shop at 33 Moulton Street, Manchester M8 8FQ.
Prepared by the Supreme Phone Parts team, Manchester. Last updated September 2026.