Charging Port Board
Xiaomi Redmi 9C Charging Port Board Replacement
- Fits
- Xiaomi Redmi 9C
- Fixes
- Charging faults
- Quality
- Brand new, OEM quality
- Fitting
- Professional install
Overview
What this part is
The charging port on the Xiaomi Redmi 9C is mounted on a small board at the bottom of the phone, linked to the main board by a flex cable. Daily plugging in, pocket fluff and moisture wear the port, which causes loose, slow or intermittent charging.
Before replacing it, check the cable and charger, and gently clear any lint from the port with a wooden toothpick. If charging is still unreliable, a new board is the usual fix.
Compatibility
Specifications and compatibility
- Part
- Charging Port Board
- Compatible with
- Xiaomi Redmi 9C
- Model numbers
- M2006C3MG
- Does not fit
- Redmi 9, Redmi 9T or any other model
- Fixes
- Slow, intermittent or no charging, a loose cable fit, and a phone not detected by a computer
- Does not fix
- Battery, screen, main board or software faults
- Quality
- Brand new, OEM-quality charging port board for the Xiaomi Redmi 9C. Tested before dispatch.
- Brand
- Unbranded, compatible with Xiaomi Redmi 9C
- In the box
- 1 × charging port board. Check the photos for any extra items.
- Colour
- As shown in the photos
- Installation
- Professional installation recommended
- Supplied by
- Supreme Phone Parts Ltd, Manchester, UK
Before you order
Is this the right part?
Signs it needs replacing
- The phone only charges when the cable is held at an angle
- Charging keeps starting and stopping
- The cable feels loose or falls out of the port
- A computer does not detect the phone over USB
How to check your model
Open Settings › About phone. The device name should read Redmi 9C. Tap All specs for the full model name and model number (M2006C3MG). Compare your old part with the photos before fitting.
Compare the connector shape and board layout of your old part with the photos before fitting.
Professional installation
How a technician fits this part
- Power the phone off and remove the SIM tray.
- Warm the edges of the back cover and lift it off carefully with a thin pick.
- Remove the screws and the lower cover, then disconnect the battery.
- Disconnect the board flex and any antenna cables, then lift the old board out.
- Fit the new board, reconnect the flex and cables, and reconnect the battery.
- Test charging and USB data before refitting the cover and new back adhesive.
Check that the part matches the device before fitting it or removing any adhesive backing. Once a part has been fitted, it cannot be returned for a change of mind. Faulty parts are always covered.
FAQ
Frequently asked questions
Will this fit my Redmi 9C?
Yes, if Settings › About phone shows Redmi 9C. It does not fit the Redmi 9, Redmi 9T. Compare your old board with the photos before fitting.
Does it fit the Redmi 9A?
This board is listed for the Redmi 9C. The Redmi 9A is a close relative, so compare your old board with the photos before ordering.
Will it fix a phone that will not charge at all?
Only if the charging port is the cause. Try a known good cable and charger first. If the phone still does not charge with a new board, the battery or main board may be faulty.
Is it made by Xiaomi?
No. It is a brand new, OEM-quality charging port board made to fit the Xiaomi Redmi 9C, and it is tested before dispatch.
Should I fit it myself?
We recommend professional installation. The Redmi 9C back cover has to be heated and lifted, and the battery must be disconnected before the board is removed.
How quickly will it arrive?
Orders placed before 4pm on a working day are dispatched the same day from Manchester by Royal Mail Tracked. Delivery is free on UK orders over £5. You can also collect from our shop at 33 Moulton Street, Manchester M8 8FQ.
Prepared by the Supreme Phone Parts team, Manchester. Last updated September 2026.