Apple iPad 2 Screen Replacement UK | Buy A1376 A1395 A1396 A1397 LCD Parts

The Apple iPad 2 was released in 2011 and, despite its age, remains in use across the UK in schools, homes, and as secondary devices. Many iPad 2 units that are otherwise fully functional develop screen faults through years of use and accidental drops. Replacement LCD screen parts for the iPad 2 are still widely available, and a DIY screen repair is one of the most cost-effective options for restoring these tablets to working condition.

Supreme Phone Parts Ltd supplies Apple iPad 2 LCD Screen Digitizer Assemblies compatible with model numbers A1376, A1395, A1396, and A1397, for same-day dispatch from our Manchester warehouse. This guide covers screen damage diagnosis, what's included in the replacement part, the full repair process, and UK pricing guidance.

Is My Apple iPad 2 Screen Broken? Common Screen Failure Signs

The Apple iPad 2 uses a separate glass digitizer panel bonded over the LCD display. When the device is dropped, the outer glass most commonly cracks or shatters. However, impacts can also damage the underlying LCD panel, causing black displays, coloured lines, or dead pixel patches even if the front glass appears intact.

• Cracked front glass — the most common damage type, typically from drops on hard floors or surfaces
• Blank or black display — iPad is powered on (charging indicator lights, sounds from the speaker) but the screen shows nothing
• Coloured lines across the display — vertical or horizontal bands indicating LCD panel damage
• Dead pixel patches — areas of the screen frozen or showing wrong colours
• Unresponsive touch — the digitizer layer has failed, making the touchscreen unresponsive in areas or entirely
• Ghost touches — the screen registers phantom inputs from a damaged or failing digitizer

What Does the Apple iPad 2 Replacement Screen Include?

The replacement is a complete LCD screen digitizer assembly for the Apple iPad 2, combining the IPS LCD panel and the capacitive touch digitizer glass in a single pre-bonded unit. This makes installation cleaner and faster compared to replacing the glass and LCD separately. The flex cable is pre-attached for direct connection to the logic board.

The Apple iPad 2 uses a 9.7-inch IPS display with a 1024 × 768 resolution. While this pre-dates Apple's Retina display technology, the screen remains perfectly adequate for text reading, video playback, and general use. The replacement part maintains the same display characteristics as the original.

How Much Does Apple iPad 2 Screen Replacement Cost in the UK?

Because the iPad 2 is a legacy device, Apple no longer offers official screen repairs for it. Third-party repair shops typically charge £40–£75 for an iPad 2 screen replacement, which can exceed the device's current second-hand value of £15–£40. This makes DIY repair with a part from Supreme Phone Parts the most sensible option — the part cost alone is very low, and the repair restores full functionality to a device that is otherwise expensive to fix through a shop.

How Do You Replace the Screen on an Apple iPad 2?

The Apple iPad 2 screen replacement is considered a moderate-difficulty repair. The screen is held by adhesive around the perimeter, and the internal layout — while older — follows the same basic principles as modern iPads. Here is the full process:

1. Power off the iPad 2 fully using the sleep/wake button and Home button.
2. Apply heat to the screen edges using a heat gun or hairdryer on low heat for 30 seconds per edge. Years of age may have hardened the adhesive, so ensure full coverage before attempting to open.
3. Place the iPad face down on a clean, padded surface to protect the rear casing.
4. Insert an opening pick at the top edge (opposite the Home button) and work slowly around the sides. The iPad 2's front glass is fragile, especially on older, heat-stressed units — work carefully.
5. Avoid the Home button area (bottom of the screen) until last. The Home button cable runs close to the bottom edge.
6. Open from the right side, keeping the left side connected as a hinge to protect the digitizer cable.
7. Disconnect the LCD cable and digitizer cable from the logic board. The iPad 2 has two connectors for the display assembly.
8. Transfer the Home button from the old screen to the new one. This preserves the original button mechanism in the replacement frame.
9. Connect the new screen's cables to the logic board.
10. Power on and test display and touch before sealing.
11. Apply adhesive and seal.

Compatible Model Numbers for the Apple iPad 2

• A1395 — Apple iPad 2 Wi-Fi (most common UK model)
• A1396 — Apple iPad 2 Wi-Fi + 3G (GSM)
• A1397 — Apple iPad 2 Wi-Fi + 3G (CDMA)
• A1376 — Apple iPad 2 (China variant)

The A1395 is the most common UK version. Confirm your model number on the rear of the device or in Settings > General > About > Model Number.

Is the Apple iPad 2 Worth Repairing?

The iPad 2 is a legacy device that no longer receives software updates from Apple. However, for simple tasks — as a children's reading device, a dedicated media player for video streaming on home Wi-Fi, or a simple browsing device for older users — a working iPad 2 still serves its purpose. If the device is otherwise functional and a screen repair part is inexpensive, the repair makes sense rather than discarding a working device unnecessarily.

About Supreme Phone Parts Ltd

Supreme Phone Parts Ltd is a Manchester-based wholesale supplier of phone and tablet repair parts. We stock legacy Apple parts alongside current-generation parts to support repair technicians and self-repairers working on the full range of iOS devices in the UK market.

33 Moulton Street, Cheetham Hill, Manchester, M8 8FQ
Phone: 07879 888826 | Email: info@supremephoneparts.com

Frequently Asked Questions

Does Apple still repair the iPad 2?

No. Apple has officially discontinued repair service for the iPad 2, classifying it as a “vintage” and subsequently “obsolete” product. Third-party repair using aftermarket parts is the only option for obtaining a replacement screen for the iPad 2.

Is the iPad 2 screen the same as the iPad 1 screen?

No. The Apple iPad 1 and iPad 2 use different display assemblies that are not interchangeable. Ensure you order the part specifically listed for the iPad 2 (A1395, A1396, A1397, or A1376).

Why is my iPad 2 screen cracking from the inside?

This typically indicates LCD damage from impact pressure even if the outer glass looks intact. When an iPad is dropped, the shock can travel through the glass into the LCD, causing internal panel fractures that appear as black patches or spreading discolouration. A full LCD screen assembly replacement is required in this case.

Do I need special tools to replace the iPad 2 screen?

You need a heat gun or hairdryer, thin plastic opening picks, a plastic spudger, isopropyl alcohol, and adhesive tape or B7000 glue. Given the age of the iPad 2, the adhesive may be harder and more brittle than on newer devices — apply thorough heat before attempting to open.

Does Supreme Phone Parts stock all iPad 2 variants?

Contact us at info@supremephoneparts.com or call 07879 888826 to confirm stock availability for specific iPad 2 model variants before ordering.

Supreme Phone Parts Ltd — Manchester's trusted wholesale phone and tablet parts supplier. eBay Top Rated Seller. Same-day dispatch before 3pm. Next-day UK delivery available.