The Apple iPad Pro range represents Apple's highest-specification tablets, built for professional creatives, developers, business users, and power users. When the screen on an iPad Pro fails — whether through accidental damage or hardware fault — the repair investment is clearly worthwhile given the premium value of these devices. Supreme Phone Parts Ltd stocks replacement LCD screens for the iPad Pro 9.7-inch and the iPad Pro 11-inch (2018, 2020, 2021, and 2022), all available for same-day dispatch from Manchester.

This guide covers the key differences between these models, how to diagnose screen faults, the full repair process for each form factor, and UK pricing context to help you decide between DIY repair and professional service.

iPad Pro 9.7 Inch Screen Replacement (A1673 / A1674 / A1675)

The Apple iPad Pro 9.7-inch (2016) was Apple's first 9.7-inch Pro model, featuring a wide colour P3 display, True Tone flash, and the first True Tone-calibrated LCD in an iPad. Its 9.7-inch IPS Retina display offers 2048 × 1536 resolution at 264 PPI.

The replacement LCD screen for the iPad Pro 9.7 is a complete assembly compatible with A1673 (Wi-Fi), A1674 (Wi-Fi + Cellular), and A1675 (Wi-Fi + Cellular + Apple SIM). The repair process follows the standard adhesive-open method with home button transfer required for Touch ID.

iPad Pro 11-Inch Screen Replacement (2018 / 2020 / 2021 / 2022)

The Apple iPad Pro 11-inch line introduced the all-screen Face ID design to the iPad in 2018, eliminating the home button entirely. The 11-inch Liquid Retina display features ProMotion 120Hz adaptive refresh, True Tone, P3 wide colour, and 600 nits brightness. It's one of the finest displays on any tablet available.

Key model numbers for the iPad Pro 11-inch range:

  • 2018 (1st Gen): A1980, A2013, A1934
  • 2020 (2nd Gen): A2228, A2231, A2068
  • 2021 (3rd Gen): A2301, A2459, A2301
  • 2022 (4th Gen): A2435, A2761, A2762

The iPad Pro 11 uses Face ID for authentication — the TrueDepth camera system is housed in the slim top bezel, not the screen itself. Screen replacement on the 11-inch Pro does not affect Face ID, provided the front sensor cable is reconnected correctly.

Signs Either iPad Pro Screen Needs Replacing

All iPad Pro models show the same common screen failure symptoms. Because these are premium devices, screen damage is particularly disruptive. The typical signs requiring a replacement screen are cracked or shattered glass from drops, a completely black display on a running device, coloured lines or dead pixel patches, partial or complete touch failure, LCD bleed spreading from an impact point, and Apple Pencil no longer being recognised by the digitizer.

  • Cracked glass from drops — common despite the strong build quality
  • Black display — device is running but screen is dark
  • LCD bleed or discolouration spreading from impact point
  • Coloured lines or dead pixels
  • Touch failure — partial or complete
  • Apple Pencil not recognised — digitizer layer damaged

How Much Does iPad Pro Screen Replacement Cost in the UK?

iPad Pro 9.7-inch: Apple no longer services this model officially. Third-party repair shops charge £80–£140. Second-hand units sell for £70–£130 in the UK.

iPad Pro 11-inch (all generations): Apple's official out-of-warranty repair price is £295–£455 depending on generation. Third-party repair shops charge £130–£220. iPad Pro 11-inch units sell for £350–£700+ second-hand, making a DIY screen replacement a very strong investment — potentially saving £200 or more over Apple's official repair price.

How to Replace the iPad Pro 9.7-Inch Screen

  1. Power off the iPad Pro 9.7.
  2. Heat the display edges for 30–45 seconds per side.
  3. Apply suction cup and insert a thin opening pick, working around the perimeter.
  4. Open from the right side, keeping the left as a hinge.
  5. Disconnect three display flex cables (LCD, digitizer, front camera) from the logic board.
  6. Transfer the Home button from the old screen to preserve Touch ID — critical on this model.
  7. Connect the new screen's cables to the logic board.
  8. Power on and test display, touch, Touch ID, and Apple Pencil before sealing.
  9. Apply fresh adhesive and seal.

How to Replace the iPad Pro 11-Inch Screen (2018–2022)

The iPad Pro 11 is the most technically demanding iPad repair due to the Face ID TrueDepth camera system. The front sensor flex cable must be reconnected precisely to maintain Face ID functionality.

  1. Power off the iPad Pro 11 fully.
  2. Heat the display edges thoroughly for 30–45 seconds per side. The 11-inch all-screen design has adhesive very close to the edge.
  3. Insert a thin opening pick carefully. The minimal bezels mean less clearance than older iPads.
  4. Open from the right side, keeping the left as a hinge.
  5. Disconnect the display flex cables. The Pro 11 has the TrueDepth camera system in the slim top bezel — its flex cable must be handled with extreme care.
  6. No home button transfer required — Face ID is in the bezel hardware, not the screen.
  7. Connect the new screen's cables to the logic board.
  8. Power on and test display, touch, Face ID, ProMotion 120Hz, and Apple Pencil 2 before sealing.
  9. Apply adhesive and seal.

Will Face ID Work After iPad Pro 11 Screen Replacement?

Yes, provided the TrueDepth camera flex cable is disconnected and reconnected carefully during the repair. Face ID on the iPad Pro 11 is housed in the top-edge bezel hardware (not the screen itself), so a screen replacement does not affect the Face ID components. Reconnect all front sensor cables fully during reassembly.

Why Choose Supreme Phone Parts?

  • Same-day dispatch before 3pm, Monday–Friday from Manchester
  • Next-day UK delivery available on all in-stock orders
  • eBay Top Rated Seller with thousands of verified UK buyer reviews
  • Wholesale pricing for repair businesses
  • Quality-inspected parts before every dispatch

Supreme Phone Parts Ltd
33 Moulton Street, Cheetham Hill, Manchester, M8 8FQ
Phone: 07879 888826 | Email: info@supremephoneparts.com

Frequently Asked Questions

Is the iPad Pro 11-inch 2018 screen the same as the 2020 screen?

No. While the display specifications are very similar, the iPad Pro 11-inch 2018 (1st Gen) and 2020 (2nd Gen) use different display assemblies with different connector configurations. They are not interchangeable. Always confirm your exact generation before ordering.

Does Face ID still work after replacing the iPad Pro 11-inch screen?

Yes. Face ID on the iPad Pro 11-inch uses the TrueDepth camera system in the slim bezel, not the screen assembly itself. A correctly performed screen replacement preserves full Face ID functionality.

Does Apple Pencil work after iPad Pro screen replacement?

Yes. The iPad Pro 9.7 supports Apple Pencil 1st Gen. The iPad Pro 11-inch (2018 and later) supports Apple Pencil 2nd Gen. A quality replacement LCD digitizer assembly fully restores Apple Pencil support on all models.

How long does iPad Pro screen replacement take?

iPad Pro 9.7: 30–60 minutes for an experienced technician. iPad Pro 11-inch: 45–90 minutes, due to the more complex internal layout. Allow extra time for careful TrueDepth cable management on the Pro 11 models.

Do you stock all iPad Pro 11-inch generations?

Yes. We stock screens for the 2018, 2020, 2021, and 2022 iPad Pro 11-inch models. Contact us at info@supremephoneparts.com or call 07879 888826 to confirm availability for your specific generation.

Supreme Phone Parts Ltd — Manchester's trusted wholesale phone and tablet parts supplier. eBay Top Rated Seller. Same-day dispatch before 3pm. Next-day UK delivery available.

0 comments

Latest Stories

This section doesn’t currently include any content. Add content to this section using the sidebar.