Google Pixel 10 Pro Screen Replacement UK: Cost, Guide & Best Parts 2026

The Google Pixel 10 Pro is Google's current flagship as of early 2026 — and its 6.3-inch LTPO OLED display with 3,000+ nits brightness is among the finest screens on any Android phone. If you've cracked your Pixel 10 Pro screen, or if you're a repair shop stocking up for this increasingly common repair, this is the complete UK guide.

Google Pixel 10 Pro Display Specifications

Specification Google Pixel 10 Pro
Display size 6.3 inches
Panel type LTPO OLED
Resolution 2856 × 1280 (QHD+)
Pixel density ~495 ppi
Refresh rate 1–120Hz (LTPO variable)
Peak brightness 3,000+ nits
Fingerprint sensor Under-display optical (improved gen)
Glass protection Corning Gorilla Glass Victus 2+
Water resistance IP68

The Pixel 10 Pro uses Google's latest LTPO OLED technology with an improved under-display fingerprint sensor generation. Replacement screens must be Pixel 10 Pro-specific — not compatible with Pixel 9 Pro or any earlier model.

Google Pixel 10 Pro Screen Replacement Cost UK 2026

Official Google Repair

Model Official Cost (Estimated)
Pixel 10 Pro £200 – £270

Independent UK Repair Shop

Service Price Range
Screen replacement (parts + labour) £130 – £200
Labour only £45 – £70
Express/same-day Add £25–£40

DIY Parts Cost

Screen Type UK Price
OEM-equivalent LTPO OLED £100 – £160
Grade A aftermarket LTPO £75 – £115

UK wholesale supplier: Supreme Phone Parts Ltd — Manchester, same-day dispatch.

Pixel 10 Pro vs Pixel 9 Pro: Screen Differences

Feature Pixel 9 Pro Pixel 10 Pro
Screen size 6.3 inches 6.3 inches
Resolution QHD+ (2856 × 1280) QHD+ (2856 × 1280)
Panel LTPO OLED LTPO OLED (updated)
Fingerprint sensor Under-display optical Under-display optical (improved)
Compatible? No No

Despite near-identical specs on paper, the Pixel 10 Pro and 9 Pro use different display assemblies with different flex cable layouts and updated fingerprint sensor implementations. Parts are not interchangeable.

Pixel 10 Pro Repair Difficulty

Repair difficulty: Difficult

Like other Pro-series Pixels, the 10 Pro uses rear-entry access with strong IP68 waterproof adhesive throughout. The high-value LTPO OLED panel requires careful handling during both removal and installation.

Key challenges:
- Strong waterproof adhesive requiring extended heat application
- High-value display — mistakes are expensive
- Under-display fingerprint sensor (improved gen) requires proper installation
- Rear-entry design (back glass must be removed first)

Step-by-Step: Pixel 10 Pro Screen Replacement

Tools Required

  • Heat gun / industrial heat mat
  • Suction cup (standard or large)
  • Plastic prying picks × 4
  • Pentalobe screwdriver
  • Phillips PH000 screwdriver
  • Anti-static tweezers
  • IPA 90%+
  • Pre-cut Pixel 10 Pro adhesive kit
  • Anti-static wrist strap

Time Estimate

  • Experienced technician: 60–90 minutes
  • First-time DIY: 2.5–4 hours

Key Steps

Step 1: Power off and remove SIM tray.

Step 2: Heat back glass at 65–70°C for 2 minutes. Apply evenly across all four edges.

Step 3: Remove back glass using suction cup + plastic picks. Work slowly — wireless charging coil is attached.

Step 4: Remove all internal screws. Photograph before removal.

Step 5: Disconnect battery connector (mandatory first step).

Step 6: Disconnect display flex cables — main display and fingerprint sensor (routed separately on the Pixel 10 Pro).

Step 7: Heat front glass at 65–70°C for 2 minutes.

Step 8: Separate display from frame using suction cup and picks, working from the bottom edge.

Step 9: Install new LTPO OLED assembly. Route flex cables correctly, connect both display and fingerprint connectors.

Step 10: Pre-test before sealing: display, touch, fingerprint, cameras.

Step 11: Apply pre-cut adhesive strips. Press firmly for 10 minutes. Reattach back glass.

Where to Buy Pixel 10 Pro Screens UK

Supreme Phone Parts Ltd — Manchester

  • OEM-equivalent LTPO OLED assemblies for Pixel 10 Pro
  • UK warehouse, same-day dispatch
  • Trade accounts for repair shops
  • 30-day returns

Contact: info@supremephoneparts.com | 07879 888826
Shop: www.supremephoneparts.com/collections/google

FAQs: Pixel 10 Pro Screen Replacement UK

Q: How much does a Pixel 10 Pro screen replacement cost in the UK?
Official repair: £200–£270. Independent shop: £130–£200. DIY parts: £75–£160.

Q: Where can UK repair shops buy Pixel 10 Pro screens wholesale?
Supreme Phone Parts Ltd in Manchester. Trade accounts available.

Q: Is the Pixel 10 Pro screen compatible with the Pixel 9 Pro?
No. Despite similar specs, the Pixel 10 Pro uses updated LTPO OLED assemblies with different cable routing. Parts are model-specific.

Q: How long does a Pixel 10 Pro screen repair take?
60–90 minutes for experienced technicians. 2.5–4 hours for first-time DIY.

Q: Does a third-party Pixel 10 Pro screen affect the fingerprint sensor?
Only if using low-quality incompatible screens. OEM-equivalent assemblies from reputable UK suppliers maintain full fingerprint function.

Supreme Phone Parts Ltd — Manchester, UK. Wholesale Pixel 10 Pro screens, same-day dispatch, trade accounts welcome.

📍 33 Moulton Street, Cheetham Hill, Manchester, M8 8FQ | 📞 07879 888826 | 🌐 www.supremephoneparts.com

0 comments

Latest Stories

This section doesn’t currently include any content. Add content to this section using the sidebar.