iPhone 11 Pro Max Screen Replacement: Choosing the Right Option

The iPhone 11 Pro Max carries a 6.5-inch Super Retina XDR OLED display. At 2688×1242 resolution and 458 ppi, it remains a premium panel, and choosing the right replacement requires understanding the three quality tiers available.

  • Display type: Super Retina XDR OLED
  • Size: 6.5 inches
  • Resolution: 2688×1242 px at 458 ppi
  • Features: True Tone, Wide Colour (P3), HDR, 800 nits / 1200 nits peak

Replacement Screen Options

Type Technology Quality Level Price
Incell LCD IPS LCD Budget — functional, not OLED-grade £22.61
GX OLED with Frame Flexible OLED Premium — close to original £38.54
Soft OLED Flexible OLED Premium — near-original colour £45.78

Which should you choose?

  • Incell LCD (£22.61): Best for budget repairs or secondary devices. All touch and Face ID functions work. Display will lose true-black OLED rendering.
  • OLED with Frame (£38.54): Includes the full frame for structural rigidity. Good for resellers or quality-focused repairs.
  • Soft OLED (£45.78): Flexible OLED substrate — superior colour accuracy and contrast versus Incell.

→ Incell LCD – £22.61
→ OLED with Frame – £38.54
→ Soft OLED – £45.78

Cost Comparison

Repair Route Cost
DIY – Incell LCD £22.61
DIY – Soft OLED £45.78
Independent repair shop £70–£110
Apple Store (out of warranty) £299

Repair Notes

The 6.5-inch form factor gives slightly more room to work than the 11 Pro. However, the larger display means more adhesive perimeter to break. A heat mat or iOpener is helpful for the opening stage.

OLED with Frame option: Includes the structural chassis — you must also transfer the proximity sensor, barometric vent, and adhesive gaskets in addition to the standard front camera and earpiece. Allow 60–90 minutes.

Step-by-Step Overview

  1. Power off. Remove two pentalobe screws at the bottom.
  2. Apply suction to the lower screen, break the perimeter seal, and swing open to the left (max 90°).
  3. Remove the Y000 connector shield and disconnect display cables.
  4. Transfer the front camera, earpiece speaker, and proximity sensor to the new panel.
  5. Connect new display, power on, test all functions.
  6. Close and seal.

Frequently Asked Questions

What size screen does the iPhone 11 Pro Max have?

6.5 inches, with a 2688×1242 OLED display at 458 ppi. Noticeably larger than the 11 Pro (5.8 inches) and the standard 11 (6.1 inches).

Is the Incell LCD noticeably different on the Pro Max?

At 6.5 inches, a side-by-side comparison reveals the difference in black levels and colour saturation more readily than on a smaller screen. If the device is used for media consumption, the OLED options are a better investment.

Does the OLED with Frame include the front camera?

No. The frame is the structural chassis around the display. You still transfer your original front camera, earpiece, and sensor components into the new frame.

Will True Tone work on an aftermarket screen?

Aftermarket OLED screens typically restore True Tone. Incell LCD replacements may show slightly different white balance under True Tone mode due to panel calibration differences.

Can a first-timer repair an iPhone 11 Pro Max?

Yes. The larger size is slightly more forgiving than the 5.8-inch 11 Pro. Allow 60–90 minutes for a careful first attempt.

Latest Stories

This section doesn’t currently include any content. Add content to this section using the sidebar.