Samsung Galaxy Tab Screen Replacement Guide (Which Model, Cost & Parts UK)

If your Samsung Galaxy Tab screen is cracked, the first job isn't buying a part — it's confirming exactly which Galaxy Tab you own. Samsung has sold well over a dozen Galaxy Tab variants since 2014, and screens are not interchangeable between them, even when two models look identical. This guide identifies every model by its rear-cover print code, compares realistic UK screen replacement costs across the entire range, and routes you to the correct part or step-by-step guide for your specific tablet.

We're Supreme Phone Parts, a Manchester-based wholesale supplier and eBay Top Rated Seller. We stock genuine and OEM-spec screens across the Galaxy Tab range, offer trade accounts for repair shops, and ship next-day across the UK.

How to Identify Your Galaxy Tab Model (Before You Buy a Screen)

Every Galaxy Tab has a model number printed on the back cover, usually near the bottom, in the format SM-XNNN (for example SM-T230 or SM-X200). This number — not the marketing name on the box — is what determines which screen fits. Two tablets both called "Galaxy Tab A8" can use different digitisers depending on region and manufacturing batch, so always confirm the SM- code before ordering.

1. Turn the tablet over. Look for small printed text near the Samsung logo or regulatory markings on the back panel.
2. Find the code starting SM-. It will be followed by 3-4 digits and sometimes a letter suffix (e.g. SM-T500, SM-T590, SM-X306).
3. No visible print, or worn off? Go to Settings > About tablet > Model number on the device itself.
4. Cross-check the screen size and year. Use the comparison table below to match your model number to the correct generation and confirm before ordering.

Quick answer: if your model number starts SM-T2xx or SM-T5xx, you almost certainly have an older Galaxy Tab 4, Tab A, or Tab E (2014-2019). If it starts SM-T5xx (higher range), SM-P6xx, or SM-X2xx/X6xx/X7xx/X9xx, you have a more recent Tab A, S-series, or current-generation model (2019 onwards).

Samsung Galaxy Tab Range Comparison: Model, Screen Size & UK Screen Cost

Prices below are typical UK retail ranges for a replacement screen/digitizer assembly part only (not fitting labour), based on current market rates for aftermarket and OEM-spec parts as of 2026. Older, budget models use cheaper LCD panels; newer S-series tablets use AMOLED and cost significantly more to replace.

Prices are for the part only. Fitting typically adds £30-£60 if you're not doing it yourself, depending on the repair shop and model complexity.

Galaxy Tab 4 Screen Replacement: What You Need to Know

The Galaxy Tab 4 is Samsung's 2014 budget tablet line, sold as the 7.0-inch (SM-T230 Wi-Fi, SM-T231 3G, SM-T235 LTE) and 10.1-inch (SM-T530 Wi-Fi, SM-T531 3G, SM-T535 LTE) variants. Both use a 1280x800 TFT LCD panel rather than AMOLED, which is why replacement parts are among the cheapest in the entire Galaxy Tab range — typically £20-£35 for the screen and digitizer assembly.

Because the Tab 4 is over a decade old, genuine Samsung screens are largely out of production; aftermarket LCD/digitizer assemblies are now the standard replacement across the UK repair trade. Quality varies between suppliers, so check for a stated touch-response and colour-accuracy spec rather than buying on price alone. Given the tablet's age and low resale value, it's worth weighing screen cost plus fitting time against simply upgrading, unless the device has sentimental or specific-use value (e.g. a dedicated kiosk or car headrest display).

Is It Worth Replacing the Screen on an Older Galaxy Tab?

For Tab 4 and early Tab A models: usually only if the part is cheap and you're comfortable fitting it yourself, or a shop charges a low flat fee. At £20-£35 for the part plus £30-£45 fitting, you're looking at £50-£80 total to repair a tablet that may be worth less than that secondhand. It still makes sense if the tablet has a specific ongoing use (children's tablet, dedicated media/kiosk device, backup unit) where buying an equivalent replacement would cost more.

For Tab S-series models, repair is almost always worthwhile: even a £180 AMOLED screen on a Tab S9 is a fraction of a replacement tablet's cost, and the S-series holds resale value well.

Step-by-Step: Replacing a Galaxy Tab Screen

The general process is broadly similar across the range, though screw positions, adhesive strength, and connector count vary by model — always check the specific guide for your model before starting.

1. Power off the tablet and remove the SIM/SD tray if fitted.
2. Apply gentle heat (a heat gun on low, or a heating pad) around the edges to soften the adhesive holding the screen to the frame.
3. Use a plastic pry tool to lift the screen from a corner, working slowly around the edge — metal tools risk damaging the digitizer flex cables underneath.
4. Disconnect the display and digitizer flex cables from the motherboard, noting their position and orientation.
5. Remove any remaining bracket screws and lift the old screen assembly clear.
6. Fit the new screen, reconnecting flex cables in reverse order, and test the display and touch response before applying new adhesive.
7. Re-seal the frame with fresh adhesive strips or B7000 glue and allow to cure before use.

If you'd rather not open the tablet yourself, look for a local repair shop experienced with Samsung tablets, or ask about trade repair accounts if you handle volume.

Frequently Asked Questions

How do I know which Galaxy Tab model I have?

Check the model number printed on the back of the tablet (format SM-XNNN), or go to Settings > About tablet > Model number. This code, not the marketing name, determines which screen fits.

Can I use a Galaxy Tab A screen on a Galaxy Tab S?

No. Tab A models use LCD panels with different connectors and mounting points to Tab S AMOLED models, even where screen sizes are similar. Always match the exact SM- model number.

How much does a Galaxy Tab 4 screen replacement cost in the UK?

Typically £20-£35 for the screen and digitizer part alone, plus £30-£45 for fitting if you use a repair shop — roughly £50-£80 total.

Is the Galaxy Tab 4 still supported with parts?

Genuine Samsung parts are largely discontinued for the Tab 4 given its age, but aftermarket LCD/digitizer assemblies remain widely available across the UK repair trade.

Do all Galaxy Tabs use AMOLED screens?

No. Budget and mid-range lines (Tab 4, Tab A, Tab A7, Tab S6 Lite) use TFT or IPS LCD panels. The S-series flagship line (S2, S3, S5e, S6, S7, S8, S9, S10) uses Super AMOLED or Dynamic AMOLED 2X, which costs more to replace but delivers better colour and contrast.

Is it worth repairing an old Galaxy Tab 4 or Tab A?

Only if the part is cheap (which it is for these models) and the tablet still serves a specific purpose. At £50-£80 all-in for repair, weigh this against the tablet's resale value and whether a newer model would serve you better long-term.

Where can I buy genuine Galaxy Tab screen replacement parts in the UK?

Supreme Phone Parts stocks screens across the Galaxy Tab range with next-day UK delivery and trade accounts for repair businesses. Browse the full Samsung Galaxy Tab parts collection or jump to a model-specific guide below.

Model-Specific Galaxy Tab Guides

• Galaxy Tab S2 9.7 Screen Replacement Guide
• Galaxy Tab S6 Lite Screen Replacement Guide
• Galaxy Tab S5e Screen Replacement Guide
• Galaxy Tab A 8.4 / 8.0 Screen Replacement Guide
• Shop All Galaxy Tab Screen Replacement Parts