iPad Screen Replacement: Which Model Do You Have? (Complete Guide)

Cracked iPad screen? Before you order a replacement, there's one question that trips up almost every buyer: which iPad do I actually have? Apple has released over 30 distinct iPad models since 2010 across four product lines — iPad, iPad Air, iPad mini, and iPad Pro — and several look nearly identical from the front. Order the wrong screen and you'll get a digitizer that doesn't fit, connectors that don't line up, or a display that won't calibrate correctly.

This guide shows you exactly how to identify your iPad model in under a minute, then routes you to the correct screen type and a realistic UK price band for each. We're a Manchester-based wholesale phone parts supplier and eBay Top Rated Seller, so the pricing below reflects what repair shops and consumers are actually paying for genuine-fit parts in 2026 — not inflated "from" prices designed to get you clicking.

How to Identify Your iPad Model (30 Seconds, No Guesswork)

The fastest way to identify your iPad is Settings > General > About, where you'll find a Model Name (e.g. "iPad Air") and, if you tap the row showing the model number, the precise "A" model number (e.g. A2604) that tells you exactly which generation and screen type you need. If the iPad won't turn on, the model number is also stamped on the back cover, in tiny print near the bottom.

Here's the exact method:

1. Open Settings
2. Tap General, then About
3. Look at Model Name — this gives you the friendly name (e.g. "iPad Pro (11-inch) (3rd generation)")
4. Look for the Model Number field (it may show a "part number" first — tap it once to reveal the model number beginning with "A")
5. Note the number exactly — e.g. A2197, A2270, A2602 — and cross-reference it against the table below

If the screen is too badly cracked to read, or the iPad won't power on, turn it over and check the back cover near the "iPad" logo — the model number is printed in small grey text (you may need good lighting or a loupe). You can also check the original box or the receipt if you still have it.

Why the Model Number Matters More Than the Name

Apple frequently reuses screen sizes and near-identical designs across generations — a 10.2-inch iPad from 2019 (7th gen) looks almost the same as the 2021 9th gen model, but they don't share an identical digitizer part number range, and mixing them up is the single most common wrong-part order we see. The model number is the only fully reliable identifier.

iPad Model Number Reference Table (All Generations)

Model numbers are correct as of 2026 based on Apple's published device identifiers; if you spot a discrepancy for a very new model, check Apple's own model-identification support page as the definitive source.

Realistic UK Screen Replacement Prices by Model (2026)

Expect to pay from around £25–£50 for older iPad and iPad mini LCD screens, £45–£120 for mid-range iPad Air and standard iPad models, and £120–£220+ for iPad Pro models with laminated or mini-LED displays. Prices below are trade/wholesale part costs — a repair shop's customer-facing price typically adds labour (30–60 minutes for most models) on top.

These are wholesale part prices from our current catalogue — browse the full iPad screens collection for live stock and exact SKUs matched to your model number.

iPad Screen Types Explained: LCD-Only vs Full Assembly vs Digitizer-Only

Not every iPad needs the same kind of "screen." Three distinct part types get sold under the umbrella term "iPad screen replacement," and ordering the wrong one is the second most common mistake after model mismatch:

• Digitizer/touch panel only — the glass and touch-sensing layer, used when the glass is cracked but the LCD image underneath is still perfect and undamaged. Cheapest option (from ~£7–£11 on newer models), but requires careful separation from the original LCD — best left to an experienced technician.
• LCD screen only — the display panel itself, for cases where the image is distorted, has lines, or won't light up, but the glass isn't cracked. Common on older iPad and iPad Air models sold as a single fused unit.
• Full LCD + digitizer assembly — the complete pre-bonded unit combining glass and display. This is what most iPad Pro, iPad Air, and iPad mini models require, because Apple laminates the digitizer directly to the LCD at the factory and they can't be separated without specialist tools and risking damage.

If you're not sure which your model uses, check the relevant model guide — for example our iPad Pro 12.9-inch screen replacement guide or iPad Air 4 & 5 screen replacement guide — each specifies the exact part type for that generation.

Step-by-Step: From Cracked Screen to Correct Part Ordered

1. Check power and touch function first. If the iPad turns on and touch still registers under the cracks, you likely only need a digitizer. If the image is distorted, dim, or blank, you need an LCD (or full assembly).
2. Find your model number via Settings > General > About, or the back cover if the device won't power on.
3. Cross-reference the model number against the table above to confirm generation and screen size.
4. Match to the correct part type — digitizer-only, LCD-only, or full assembly — using your model's specific guide.
5. Order from a trusted supplier with clear model-number labelling and UK stock. We ship next-day across the UK and offer trade accounts for repair shops ordering in volume.

Model-Specific Guides

For full fitting notes, tools required, and step-by-step replacement instructions for your specific model, see:

• iPad Pro 12.9-inch Screen Replacement (UK)
• iPad Pro 9.7" & 11" Screen Replacement (UK)
• iPad Air 4 & 5 Screen Replacement (UK)
• iPad mini 6 (2021) Screen Replacement (UK)
• iPad 10.2" (7th/8th Gen) Screen Replacement (UK)

Frequently Asked Questions

How do I find my iPad's model number without going into Settings?

Turn the iPad over and look at the back cover — the model number (starting with "A", e.g. A2270) is printed in small grey text near the bottom, below the "iPad" logo. This works even if the screen is completely dead.

What's the difference between iPad model name and model number?

The model name is the marketing name (e.g. "iPad Air (4th generation)"), which can be ambiguous. The model number (e.g. A2316) is a unique factory identifier tied to a single hardware revision, and it's the only number that guarantees you order the correct part.

Can I use an iPhone screen repair shop's technique for an iPad?

The tools (suction cups, heat, plastic pry tools) are similar, but iPads generally use more adhesive and larger glass panels, so the process takes longer and carries a higher risk of cracking the glass during removal if you're inexperienced.

Why do some iPad screens cost £10 and others cost £200+?

Price is driven by whether you need a digitizer-only part (cheap, glass and touch layer only) versus a full bonded LCD + digitizer assembly (expensive, includes the full display), and by screen size and technology — iPad Pro mini-LED and laminated displays cost significantly more to manufacture than standard LCD panels used in entry-level iPads.

Will any 10.2-inch iPad screen fit my model?

Not necessarily. The 7th gen (2019, A2197/A2198/A2200), 8th gen (2020, A2270/A2428/A2429/A2430), and 9th gen (2021, A2602/A2603/A2604/A2605) all share a 10.2-inch size but use different internal connector layouts and part numbers — always match by model number, not just screen size.

Do you offer trade pricing for repair shops ordering iPad screens in bulk?

Yes — we offer trade accounts with volume pricing for UK repair shops, alongside next-day delivery and our eBay Top Rated Seller track record for reliability.